quick progress thread - gt35r ls vtec

DaddyBuiltRacing

Resident Asshole
Well I think I figured my issue out. I have my wideband tapped into the D10 plug on my ECU, apparently alot of ppl are having issues with AEM 02/S300 combos so you have to tap it into another pin on the ecu, gonna do that this week and see if it helps
 

rwlsvtec_03

New Member
guy_from_nerk said:
Well I think I figured my issue out. I have my wideband tapped into the D10 plug on my ECU, apparently alot of ppl are having issues with AEM 02/S300 combos so you have to tap it into another pin on the ecu, gonna do that this week and see if it helps
Click to expand...
Hopefully it helps you, My wideband isn't ran through my ecu.
BTW I thought they were going to use crome as my alternative, it's Neptune.
Hoping to see some results today..
 

eiznekeM

New Member
Just read your whole thread, just in time too. Great job dude, it looks fantastic. Can't wait to see some videos. I can't imaging how agonizing the wait is after all that work.
 


rwlsvtec_03

New Member
For some reason it's not letting me multi-quote.

Primoce/"Good Luck Bud" : Thanks man still need all the luck in the world.

eiznekeM/"Just read your whole thread, just in time too. Great job dude, it looks fantastic. Can't wait to see some videos. I can't imaging how agonizing the wait is after all that work. "
: Horribly agonising waiting with my car just over three hours away from me.. It would suck to have something fail while it is up there especially if I couldn't afford it because then it's another $400 trailer ride back here. Thanks for the enthusiasm though I need all I can get.

guy_from_nerk/"How is your wideband not ran through your ecu, yet is able to datalog?"
AND
nathan_carmona/"^ what he said id really like to know sure would be helpful if I didnt have to wire my wideband to my ecu"

: No you cannot datalog wideband reading if there is no wideband signal ran through the ecu. I just hooked mine up without running through ecu because I didn't want the chance of ruining the computer (I am not a wiring guy) and somehow ended up with a ruined computer anyway. I would just go ahead and run it through your computer to take hold of the full advantages of the s300 system.
 


rwlsvtec_03

New Member
Car ran on the dyno yesterday! Too bad my wastegate wasn't opening. Assuming it's the damn obx wastegate. Upgrade to Tial probably Monday. Not sure what spring came with the wastegate but they let off at 20psi. Nice to know it handled 20psi on a gt35r.
 

rwlsvtec_03

New Member
once again will not let me multi-quote.
guy_from_nerk/"You have a controller hooked up to the wastegate?"
: Yes, it just is not opening. He un-hooked the controller to run it off the spring and same result.

MugenRR/"Hey how much the turbo cost you? good choice in picking that turbo"
: Thanks, It cost me $1199 from turbochargers.com price is now 1,387.50. I was actually going to buy something more like a gt28r but for the same money I could have a 35r so I got it.. Then had to build motor etc., kinda wish I got the 28, I'd prob still be driving it.
 

rwlsvtec_03

New Member
Getting a Tial MVR 44mm v-band Wastegate in black. Not sure if it will get done this week but it's roughly 15 minutes to swap the wastegate plus tune time.
 

rwlsvtec_03

New Member
Wastegate is swapped. He ran the car on an 11lb spring, hooked up the boost controller and set to 14psi. Attempted to make a pull and my blow off valve flew off. Could be the c clip wasn't in 100% or the bov base doesn't fit the flange correctly but will find out tomorrow and hopefully get a good pull. I would be taking the day off tomorrow to go get it if it wasn't for that damn bov.
 

rwlsvtec_03

New Member
Okay more problems. Replaced the BOV so it is absolutely fine. Now having problems about me not having an overflow tank and once it really heats up it pushes coolant out so I am going to send my reservoir up. other than that it seem like they don't want to keep working on my car. Getting quite irritated all this fuc*ing sh*t should have been taken care of at the beginning like I fuc*ing told them to. Might be taking a trip to pick up a 240sx coupe w/sr20 this weekend. Can't stand to wait on my car any longer.
 
You must log in or register to reply here.
Top