Search results

I'm using the stock d16 pump, but bracket doesn't fit the Vtec heads

Almost have my perfect specs, -2 front and -1 rear. Eye balled the rear to -1 by luck. Finally have the right PS bracket from a CRV, forget it was aluminum.

I have the Osram +80% wonder if these are better

Went reverse staggered, 15x9 and 15x8

It's going to be a photo finish lol

Season is half way through, but not much i can do with the car burning/shooting out oil and the suspension being trashed.

Fixed my oil burning from the GSR, solution swapped it out lol. Themal Gasket for the B20 and my friend gave me what looks like a 1st Gen BLOX manifold, ITR rep for the B20. Swap TIme Transmission bottom t bracket bolt stripped

Remembered I had extra spindles in my storage so prepped for tomorrow after I got out of work. New ARP studs, NTN Bearing, and Buddy Club RCA installed.

After installing my front subframe and sway bar I started hearing a clunk in the passenger side on potholes. Suspension was preloaded so it masked the problem until I started taking things apart and found out it was my Hard Race extended lower ball joint. 6 years of abuse from street and autox...

Thanks, I'm trying. Installed my new header, test pipe and o2 sensor RMF style header with some free J2 header bolts Comparison with new Denso sensor installed. In with the new PLM test pipe, highly recommend it, so awesome for a lot of applications.Didn't get to...

Small 0.5 liter catch breather wasn't cutting it, I need to do a compression and leak down but found that I have some bad blow-by, my rings might not have been gaped or clocked improperly. I installed a 2 liter catch breather and added a return line like the Endyn style, works better now and no...

Installed a block breather, need to add a oil return. It's filling up at high rev, whoops. Also have a new spark plug cover, old red DC Sport one was clashing. No more PCV, car runs a lot better now I think. New cover :D Valve Cover getting a paint job soon. I tried to install it high up...

Thank you sir! This job was huge, I tried to make it as quick as possible. Only took 11 hours lol, took a few breaks though. Subfra was out in 3 hours Rack was a pain, didn't want to mess up any fittings. Changed from a stock 8 tooth to an Integra 9 tooth. Still need an alignment to...

Hit a milestone today Did some painting Test my rigid collars for tomorrows install.

Finally got around to it, color matched the front end.

Sorry, just the bar is like 8lbs.

you can cut out the door bar with those nascar door bars installed, save you like +40lb

Car behaved this weekend, BMWCCA Autocross Saturday and Honda Fest Autocross Sunday. Need to finish my suspension badly. BMWCCA, great first event for me, dry morning and wet afternoon. Best of both worlds. Honda Fest-6th out of 20 by only .4 sec. but I was Fastest FWD on street tires at...

Bad timing, front wheel bearing was shot right before my 2 event weekend. So after work I pulled it off and replaced it. Added a little bling, ARP studs.

Bought a new Walbro 255 lhp for cheap because it was only the pump, bought a Delphi strainer and made out saving like $30 compared to a whole kit that comes with unnecessary pieces . New adjustment screw for my AEM FPR, Home Depot for the win. New intercooler for the 91 Civic