Search results

I got a set on my car but some of the tabs mounting them are broken and their just standard JDM they could also use refinished cause it looks like a clear coat is pealing off of them. Could also use the fog lights fixed, it can't hold bulbs in the housing atm. They came on my car when I got it...

Ah I don't have to deal with stuff rusting out where I live, You also better check your hard brake lines too. Probably be a good idea to look at the service manual I believe i posted a link to them and others have too but i can't find it, no easy view all your posts button to find.

Tried a magnet? All that hole gives access to is a lever which releases the shift lock, and its just a hole in the plastic cover, with open space after that till the lever so you could finish pushing it though if you don't need it. Other than that You have to remove the center console, which...

Why do you need to replace your fuel lines? and Tank? As far as I know the fuel lines that come up from the tank to the firewall are metal then their is a rubber hose to the fuel filter and then to the fuel rail after that and a rubber fuel return line back to a metal line, not sure about on...

I think my old B20B in that car was Low compression too because it only had about 120psi. Yep apparently P3F pistons are low compression and that is what came out of my old engine. http://forums.g2ic.com/showthread.php?140434-B20-High-Compression-or-Low I suppose low compression or not don't...

Ok so far for prices through Rock Auto w/shipping; with out Engine Oil, Oil Filter, Tranny Fluid, and Coolant I have. Rebuild Intake Manifold Gasket, Exhaust Manifold Gasket, Exhaust manifold down pipe gasket, Water Pump Gasket, Clutch Pilot Bearing, Head Gasket, Main Bearing, Connecting Rod...

Was wondering If I need a new oil pump or can reuse this one cause it has some scorning i can feel with my finger nail on the back side and a little on the front but the gears seam fine on the inside with only the back side having a little scoring. Rear Housing Front Housing Front of Oil pump...

I work for a moving company. Had a nice easy job today probably only 1-1.5hrs of work. Also Pulled Engine and tranny today Here's the Photos, Looks like I need Crankshaft machined on con rods maybe under sized bearings or just polished and mains are perfect. Camshafts appear to be fine for...

lol my coworker tells me the same thing "Dont overthink it." when I'm working on a moving job. Though for auto repair, its so much easier to diagnose first then order parts. Should start working on pulling engine out tomorrow, need to break down 1 large crt tv and a monitor.

I thought of that too saw one for 350 in califonia, but they had even higher priced ones $350 http://www.jdmenginepro.com/product/97-01-honda-crv-2-0l-jdm-b20b-engine/ $600 http://www.jdmenginepro.com/product/97-01-honda-crv-b20b-engine-jdm-b20z-high-compression/ Looked locally on car-part.com...

uh I was going to remove whole engine and then go from there, But mainly I am looking to find the correct parts for the B20B, as in looking up parts under a Honda CRV would work or not?

I was Just having some fun in the mountains and well my engine started knocking, loud at anything above 2,000rpm. II believe it may be a bearing because I put in about 3/4 of qt of tranny fluid that I had in my trunk and another 3 qt of 20w-50 from the gas station and drove it home under...

Yeah well so are hardrace's bushings, but I couldn't find a seller for mugen. Edit: Saw this stuff on a youtube video 3M 08609 Window-Weld -Amazon Used it to stiffen up and fix motor mounts etc on cars.

I looked only one's I found available were stock and Hardrace, so I just bought the stock bushings. Figured i'd fill them with Ultra Black RTV

I don't think so, last time I had a problem in my distributor I looked it up and it seams that all the wiring is the same just the connectors changed.

I personally haven't used them, but I google them and one forums had some people saying that they were fine. Only thing I can say is need to do some research your self, Unless anybody else has any experience with them.

I found when I had a bunch of weight (5-10gal of oil) in the rear of my Integra it felt much more flat though the corners. Other than that, mine is still stock. Some other people on the forum probably know better than I.

Did the Rear's already the control arm I believe are squeaking now and then usually when cold out though. https://www.youtube.com/playlist?list=PLmWE1l2G8wxBB1dcNyZCtIPNAcPQKLeVf Found out both Trailing arm bushings are shot already after a couple of years. Ordered some new ones, any ideas one...

The ICU is located behind the fuse box on the drivers side you have to remove the trim and unbolt the fuse box and then on the back side the ICU is clipped in and has capacitors in it that fail and leak and fry the electronics. Bad Good

Could also be bad ignition switch too. Or broken wire somewhere.