My 94 Integra LS

myxintegra

Extreme Music Addict
Good luck man! looking good so far. I hope all works out for you :thumbs up . you're quite the builder lol.
 

Integraguy04

CORNER CARVER
endo617 said:
why don't you do your own valve adjustment?
Click to expand...
well honestly i know that im very capable of doing it with the right tools. I know how to do one but with a motor that i have spent a lot of money on, i rather have someone do it that has done it a bunch of times and is familiar about it... i know when u measure the clearances with the feeler gauge that a lot has to do with "feel" seeing as how i am inexperienced with valve adjustments, i rather leave it to the pros this time.

now if it was my crx, i would totally do it b/c that is something i dont care about as much lol
 


endo617

Rattle Can Technician
Integraguy04 said:
well honestly i know that im very capable of doing it with the right tools. I know how to do one but with a motor that i have spent a lot of money on, i rather have someone do it that has done it a bunch of times and is familiar about it... i know when u measure the clearances with the feeler gauge that a lot has to do with "feel" seeing as how i am inexperienced with valve adjustments, i rather leave it to the pros this time.

now if it was my crx, i would totally do it b/c that is something i dont care about as much lol
Click to expand...
:thumbs up i feel you, hope everything goes good bro
 

Integraguy04

CORNER CARVER
endo617 said:
:thumbs up i feel you, hope everything goes good bro
Click to expand...
yea it did...got the valve adjustment and it runs good now...still needs to be re-tuned to account for the p&p but it feels good

did a compression test...was 220-230psi on all 4 cylinders

im getting the valve cover blasted down to the metal soon so i can paint it wrinkle red...i tried to use aircraft stripper but there is just so much paint i would be there forever and im not down for that lol
 

Integraguy04

CORNER CARVER
So i decided to get the valve cover powdercoated flat black instead

I also got the splitter installed.. i used the OEM tow hooks, had a circular piece of steel welded to them and drilled bolt holes through them to connect to the splitter it turned out really well


 


Integraguy04

CORNER CARVER
ask and you shall receive



I had to relocate my coolant overflow to the drivers side b/c i wanted as much fresh air going through my headlight to the intake. I used the same bracket and it fit perfect where i put it. Only had to spend $5 for hose :)


 

Integraguy04

CORNER CARVER
Samurai_Blue said:
That looks really good kyle :thumbs up

i still want your built head i want taht set up so bad
Click to expand...
lol well you cannnt havvvee iitttt :lol: I cant wait to see how much i pick up on the dyno...i mean i drove it and just revved it up a little and it felt pretty good but i dont wanna push it cuz i know it will lean out on the higher rpms
 

Integraguy04

CORNER CARVER
Imma have some new pictures up tomorrow just for an update, but also hopefully they can boost my ROTM votes lol

everything is done with the car...only thing that it needs is a re-tune
 
You must log in or register to reply here.
Top