My 94 Integra LS

Samurai_Blue

Yolo Whippin'
The Hawk HP+ i have absolutly destroyed my rotors, i also have the Brembo Blanks. Im looking at Project Mu or Carbotech right now.
 

Integraguy04

CORNER CARVER
The Hawk HP+ i have absolutly destroyed my rotors, i also have the Brembo Blanks. Im looking at Project Mu or Carbotech right now.
so the HP+ destroyed the brembo blanks or you bought those afterwards?

and those are good choices for rotors...lemme know which ones you buy and feedback
 

Samurai_Blue

Yolo Whippin'
i bought them at the same time. throught the entire life of that set up they have warped the rotor a couple of times
 

Integraguy04

CORNER CARVER
i bought them at the same time. throught the entire life of that set up they have warped the rotor a couple of times
oh well i mean i have only raced on them a few times, and on the street i run HPS pads so that might help with the rotor life
 


Samurai_Blue

Yolo Whippin'
Matt (JDMXDB ) says the HC+ by Project Mu are really good on rotor life, ive herd from instructors and others that the HAWK pads are super rough.
 

Integraguy04

CORNER CARVER
Matt (JDMXDB ) says the HC+ by Project Mu are really good on rotor life, ive herd from instructors and others that the HAWK pads are super rough.
yeah i have heard that too a couple times, i wonder if my brake cooling setup has anything to do with the rotors lasting better
 

Samurai_Blue

Yolo Whippin'
Thats probably one reason, Im going to get something like what you have or rather make something lol.
 


Integraguy04

CORNER CARVER
well i decided to run a short ram intake now b/c with my front splitter the CAI is completely cut off from airflow... to get the most amount of air into it from the outside...i dissembled the passenger headlight and removed the high beam and put it back together with everything else in it (trying to make it look clean) then i cut the edge of the housing out here are some pics.



 
Top