RIP "blue" v.2.0 (MASSIVE BUILD TO COME)

[imcnblu]

Vibrant 2.5" high flow cat arrived today

not much left before I have all the parts.

 

[imcnblu]

missed the delivery of the Blox Velocity Stack kit, picking up at UPS tomorrow. Blox 2.5" donut gasket arrived today

 

[endo617]

missed the delivery of the Blox Velocity Stack kit, picking up at UPS tomorrow. Blox 2.5" donut gasket arrived today

man you must be as happy i was when i was getting all my parts for my GSR, its going to feel good when its finally in trouble free

 

[8urcivic]

thread is worthless

 

[imcnblu]

so, the flanges I ordered (at least one) aren't going to work

the holes on the new flanges don't extend far enough to allow a bolt to go through between it and the header.

So, I'm hoping the other one works (the 3 hole flange) with my greddy sp2 exhaust. otherwise, I spent $60 on flanges I can't use.

gaaaaaaay

 

[jdmjim]

missed the delivery of the Blox Velocity Stack kit, picking up at UPS tomorrow. Blox 2.5" donut gasket arrived today

thats gay, ups sucks for that

 

[imcnblu]

So, there's a reasonable possibility that the LS may be getting pulled, or at least the process started, as early as this week

 

[imcnblu]

so, looks like a battery relocation is going to be on my list of things to do...

 

[imcnblu]

So, I started working on the car today

Now, the swap I picked up comes complete with its original engine harness, etc. I need to know what these wires are for:

to describe what you're seeing. It is a small group of wires (one red, one green) that are run over top of the intake manifold. Not sure what they are for, but I traced the wires into the main engine harness. Would like to know what they are for. I will NOT be reusing the original wire harness. I will be using my LS wire harness (which is easier to use, anyway) but I want to make sure I know what this goes to so I can ensure everything will plug in correctly.

 

[dekaf]

if im not mistaken those have some sort of function for the injectors. im not sure so dont take my word

 

[endo617]

seems like the IAT sensor, Intake Air Temp Sensor, the one in the pic on the manifold

 

[imcnblu]

That's what I'm hearing a lot of. Honda-Tech and G2IC members seem to saying the same thing. The next time I have a chance to work on it (weather not favorable today)

I'll get some better pics, remove the looms on the harness and see where it goes.

Thanks for the help. If anyone else has ideas, by all means, speak up. I accept all advice.

 

[imcnblu]

It has begun.

 

[8urcivic]

:nopics:

 

[endo617]

It has begun.

tease, theres no PICS, good luck