TeggyBear's Official JDM H22A Swap Thread.

[acclude]

Technically no the plug wires will not work. They are not long enough and *might not* fit into the plug holes deep enough since the H22 head is much larger than the F22. If you have a spare set, try it, but they're most definitely not going to work.

 

[Sammich]

Well I don't have either a D16 or a B16. Lol.... I've tryed my stock B18B wires on the H22 and they don't fit.

I haven't yet tryed my Upgraded wires on the H22 yet. They are significantly longer than the stock ones. When we got them, I wasn't even sure they were for an Integra lol

i was making the point that D series and B series engines are practically cousins like the F series and H series engines are...point i was making that if push comes the shove i believe, as the D series wires worked w/ the B series engine..same w/ teh F series wires and H series engine

 

[acclude]

unfortunately they won't work

anyways, I took some pics of the resistor box wiring on my teggy for you.

 

[TeggyBear_Ls]

i was making the point that D series and B series engines are practically cousins like the F series and H series engines are...point i was making that if push comes the shove i believe, as the D series wires worked w/ the B series engine..same w/ teh F series wires and H series engine

Oh ok. I see noow. :thumbs up

BTW, your new signature picture is awesome.

And thanks for the resistor box wiring pictures! I know a guy that does good wiring, so if I ever need help with any of the wiring, he can help us wire it up lol.

 

[acclude]

If you can grab a box that still has the plug, it's just a matter of pluggin it in and calling it a day. Mine had to be hardwired

 

[TeggyBear_Ls]

Mine has the plug on it. It's got both sides too.

It was just cut right after the plugs.

 

[robus]

hello everybody
I've found this thread by googling for info on the H22 swap. This is a greta thread though a bit dated!

I have a simple basic question: where do you hook up to switched ignition? Preferably in the engine bay.
I too have an H22a with all those extra solenoids (IAB and FPR solenoids/knock sensor) to be connected.
many thanks!