Phillips HID Install - OK They're working, now installing ***PICS***

g3teg97

Super Moderator
Going to check the fuse under the dash make sure it's good plus upgrade it to 15A or 20A.
 

kcombs

GS=goes slow
as i study this picture everything looks correct but the one circled in red witch should be 12v direct to the battery.
 

g3teg97

Super Moderator
^ Pic don't work but that little fuse box had a red cord that I thought was a ground but I plugged it up to the battery, and it came right on.
 


kcombs

GS=goes slow
g3teg97 said:
^ Pic don't work but that little fuse box had a red cord that I thought was a ground but I plugged it up to the battery, and it came right on.
Click to expand...
thats what i thought. for some reason the pic worked for me.

but glad it works.
 

g3teg97

Super Moderator
Ok. Something's a little weird.

I hooked up both sides. I turn it on, looks ok. I turn it off, then turn it back on the right bulb clicks and doesn't come on. Not sure what's up with it.
 


JDMxDB8

Raceline USA
g3teg97 said:
Ok. Something's a little weird.

I hooked up both sides. I turn it on, looks ok. I turn it off, then turn it back on the right bulb clicks and doesn't come on. Not sure what's up with it.
Click to expand...
Happend to me with my first set of HIDs. I just disconnected everything, then reconnected everything back.
 

kcombs

GS=goes slow
I think that is the igniter's way of saying don't do that...lol

btw I think that is what the black box is it's an igniter.
 

konerri

New Member
i got it...your "ground" that goes to your relay should be going to 12 volts...because your ballast as of right now doesn't have power.

your relay is a pretty shitty one...i know because i had to replaced one just like it.
but if it clicks it may still be OK.

You should be measuring 12 on that line right up to the ballast.
 
You must log in or register to reply here.
Top