Phillips HID Install - OK They're working, now installing ***PICS***

[Pugnap00]

OMG a new screw Driver?!

 

[g3teg97]

I got it for $150.

I'm going to get a new relay from discount tomorrow and test it out. The fuses looked good, but I'll try those too. I have some extras laying around.

 

[g3teg97]

OK. Discount doesn't have that relay specific to this kit.

I got some pics on the way..

 

[JDMxDB8]

Still doesn't work?

 

[g3teg97]

Well I thought possibly that it was the relay. I went to Discount Auto but they dont have any. Then I started thinking what are the odds that both the relays are shot?

I'm resizing pics now for you guys.

 

[g3teg97]

PICS


Here's the one side. There's two identical of these.

With labels. All correct, right?

That little slot has nothing there.

Labeled again

I don't know what the problem is and I have no idea what that unknown black box is listed in the pics.

 

[g3teg97]

Aiight well they're going back on the car to see if they still don't work.

 

[g3teg97]

Hooked it all back up. Nothing. The relay clicks when you turn the headlight switch on and off.

 

[g3teg97]

Just removed the fuse from the system. Tested it. Green light came on the test. It's good. Still replaced with a brand new fuse and still get the same result. Doesn't turn on.

 

[DB8 sleeper]

you mite have the plug goin from the hid to the actual car in backwards. Happened to me once. all i did was jsut take it out flip it and put it back in and it was all set

 

[g3teg97]

There's a clip on that plug that you're talking about. It could only fit correctly one way. But I did try both ways still nothing.

 

[g3teg97]

Anyone have any ideas?

 

[kcombs]

looks to me that the wire coming out of the fuse should be 12v

 

[Kuchtaboy]

Sweet! What are they? lol

 

[DA_Integra]

Nice pick up I need to invest in some HIDs for my DA.