New Custom Rear end for da GSR

[DailyDB8]

updates?

 

[jbrown97ls]

X2

 

[fusion]

I am bringing the fiberglass rear end to work tomorrow and will see if I can start to create it in metal. I have decided since I have already put some stainless in the car I will see if I can swing a deal on some stainless steel. It will be cool to have the only integra with a rust free rear end. LOL I have gotten my old job back so I can start this. It has been hard being layed off and working at a lower paying job. Puts a kink in the Integra Fund. I am willing to take donations if anyone is interested. LOL
I do like your candid comments good or bad. The Integra is all I have so I am making a super integra. I got offered a steel of a deal on a new drive train ( v6 Nissan 300z turbo and transmition Might be good drifting ) but I have too much on the go right now and not much for funds gotta watch the balance.
All the best
Fusion

 

[fusion]

Well I just cut up my new rear end. I found that I can cut up the end and install it so that it sits just above the rear bumber. I will have to remove my new totally awsome rear wing as it is in the way but it seams to fit really well. This way I will have a new look above the bumper and still have the nice standard GSR rear bumber to take the blows of poor parkers. I cant post any pictures until I get a new battery for my camera. ( On order ). I hope you can visualize what I mean. The cut line is at the natural line on the fiberglass that goes right across from left to right.
All the best
Captian Fusion : )

 

[LoweredDC4]

needs some pics bro!

 

[HondaDaIntegra]

Not so much of a clean look. I suggest Not going ahead with That. But it is ur ride and if ur happy thats all that truly matters.

 

[fusion]

Update

Well I finally got my camera battery pack. So here is a few pictures for update. You will notice I removed the defuser part of the GTM body as someone said I should leave the stock bumper. Thank you for that suggestion! I have a picture of the cutup left and cutup right as well as them both clamped on to get a feel for it. I will be removing my wing and making something different I thing as it gets in the way. The parts will be made of stainless steel and go completely around the sides to the rear of the doors to tie it in nicely and bring it out wider at the back to make it all flow. It will also be squarer than the round one I am using as a mock-up.

 

[MiketheDyke]

To be honest, I can't wait to see how the car will look like in the end...

 

[fusion]

Thanx

To be honest, I can't wait to see how the car will look like in the end...

Well I am excited as well Mike. As soon as I get the stainless rear pieces formed I will post pics. I have an Idea to move the lights down 6" and put venting in void I created. Not the holes you see but a new one. I will try to post today the idea I am thinking about,
All the best to da bothers of Acura

 

[OLDSKOOLACURA]

Sent from my Galaxy Nexus using Tapatalk 2

 

[fusion]

Here is the what I am thinking about. The upper area with be a flow threw vent.

 

[LoweredDC4]

Wow...

 

[Jayteg]

Reminds me of a skyline rear end, which looks really out of place on a teg. As said before it doesn't have the correct form. This to me would look damn good on a 240sx hatch.

 

[fusion]

I agree

Reminds me of a skyline rear end, which looks really out of place on a teg. As said before it doesn't have the correct form. This to me would look damn good on a 240sx hatch.

I already did that one but it was out of fibreglass.[ ; ) ] This be better and rustfreeeeeeeee

 

[Jayteg]

It is your car and your vision bro, I totally respect that. I'm sure I'll catch hell for my panda integra but oh well.