My Current Side Project - 1998 Honda CRV - V-Sauce inside
- Thread starter Integraguy04
- Start date
Integraguy04
CORNER CARVER
8)
Thanks! im excited for my friend to get it on the road so we can do some 4 wheel drifting.
I have a feeling it will be a great handling car once he gets the winterforce tires on it.
Integraguy04
CORNER CARVER
Ok so we finally finished up everything. Car runs good and no real big issues - it is finally out of my garage. Only thing we had to do is the idle was surging up and down so we had to make a gasket for the bottom part of the throttle bod to cut off the air supply. Here are some pics...they aernt that good cuz i had to take them with my phone at night...
Enjoy!
Got the radio install with some leftover speakers he had.
Did a valve adjustment
Fixed the idle surge with a home-made cork gasket
Completed
How it sits now....
Enjoy!
Got the radio install with some leftover speakers he had.
Did a valve adjustment
Fixed the idle surge with a home-made cork gasket
Completed
How it sits now....
Ted's Owner
On to Integra number two!
Subb'd.
Integraguy04
CORNER CARVER
So for the last month we have had issues with the automatic transmission (it is the original and has 330K on the tranny).
My friend just decided to throw in the towel and do the manual swap ahead of schedule. We plan to keep the b20 in it for the time being because he wants to put his ITR motor from his CRX into the CRV with the manual trans.
Anyway here are some pics of what we have acquired:
5 SPD 4WD CRV tranny from 2000 Honda CRV
Clutch, brake, and throttle pedals
Clutch Master
Manual heating duct
OBD2 Manual ECU
Manual Halfshaft
Passenger Side Axle
Shifter Metal Mount box (had to be drilled out b/c of spot welds)
Still need to get the following:
Transmission Mount
Manual T-Mount from CRV
Shifter Box & Cables
Stainless Steel Clutch Line
Optional, but i think we should get it - Manual engine harness..
here are some pics of my friends purchase...
My friend just decided to throw in the towel and do the manual swap ahead of schedule. We plan to keep the b20 in it for the time being because he wants to put his ITR motor from his CRX into the CRV with the manual trans.
Anyway here are some pics of what we have acquired:
5 SPD 4WD CRV tranny from 2000 Honda CRV
Clutch, brake, and throttle pedals
Clutch Master
Manual heating duct
OBD2 Manual ECU
Manual Halfshaft
Passenger Side Axle
Shifter Metal Mount box (had to be drilled out b/c of spot welds)
Still need to get the following:
Transmission Mount
Manual T-Mount from CRV
Shifter Box & Cables
Stainless Steel Clutch Line
Optional, but i think we should get it - Manual engine harness..
here are some pics of my friends purchase...
LoweredDC4
Jimmy
5speed crv's are hard to find. At least for me.
Integraguy04
CORNER CARVER
Integraguy04
CORNER CARVER
Haha yeah I'm hoping when it's done it will be cool. - I mean an ITR 4WD sounds good to me
Sent from my iPhone 4S