☆ ☆ Mikeb353 Build Thread V.2 Don't Miss Out ☆ ☆

[jdmjim]

nice man

 

[Mikeb353]

Chea, hopefully i can get the turn signal light switch fixed

 

[j13]

Check for any thing shorting out the signals, did you cut, plice, solder,shrink wrap? Check all the connections. Even if you're sure about everything...just check anyways

 

[Mikeb353]

Check for any thing shorting out the signals, did you cut, plice, solder,shrink wrap? Check all the connections. Even if you're sure about everything...just check anyways

Yeah ill double check everything, I think i might have fucked up the switch when i was taking out the cluster. because i dont even hear the relay going on and off....

 

[Mikeb353]

Well got some goodies today in guys from Jeggs.

THANKS TO LUCAS FROM H/T FOR 40/40 VALVE

ASR SUBFRAME

LAST TYPE R C/F LIP

Should have the rest of the brake stuff soon, need brake line tubing cutter double flare tool. some bits. ill be away from a week for tournament but will keep you guys updated.​

 

[jdmjim]

sweet

 

[Jabes]

looking good, any updates?

 

[Mikeb353]

Got some time today started to rip out a couple things inside the car, removed the headliner, seats belts. ABS module. Have to clean up the wiring harness a little bit when i drilled into the firewall to install the brake fittings i drilled into some wires so that needs to some love, Hopefully next week i can remove the sound damping inside and clean up the engine bay, Should be getting my SIR-G Fenders and Side Skirts in hopefully some time next week so i can send the b**** out for paint well here is some progress i did today

Headliner Gone

How the bay sits now

How she sitting now

Inside the cabin, s***s looks clean now hopefully ill have enough wire to loom all of it up

Rear of the car

All the s*** that was removed

Like i said had some time today and took a couple things off, hopefully sat i can get most of my s*** done and get ready for paint....​

 

[Mikeb353]

Wud up Ctv

Let me tell you guys , if you guys want to remove the sound dampening out of you're car go buy some dry ice. I used the heat gun method HOLLY s*** did it take forever just to removed it. s*** was a mess and it smelled so bad. If you do the heat gun method please use a ****ing mask over your face s*** got me sick.. Well i got all the rear dampening removed and cookie'd everything in the rear...

****ing Assualtech.com hasn't yet delivery my usdm spec fenders starting to loose my ****ing patience with them
​

 

[Tam4511]

lookin good so far, and it sucks dealing with people who have shitty customer service

 

[Mikeb353]

Yeah i know man, Im going to wait a bit longer see what happens i know holidays are around the corner but i placed my order on 11/9 and called 11/16 wondering where the tracking number was, Spoke to Tim i believe was his name. So im going to wait a little longer before i give them another call.

 

[Mikeb353]

Got Some goodie In....

Odessy Battery
Battery Tray Holder ( Going to be side mounted)
Brake Lines

Thanks To my Awesome GF i got me a NRG V2.5 Quick release steering wheel

Still awaiting my
k20 Swap Motor Mounts
K-Tune shifter Plate​

 

[Mikeb353]

Got a update today and some more goodies in

Well i was able to relocate the battery and get it installed still need couple things, Starting to get cold out. Hopefully next weekend i can have the jdm front end here and put the battery terminals in and pick up my doors.

Took me about 30min. to get this bad boy installed, decided to do what seanjohn did drill and tap it, to be honest with you i was surprised it held on with 3 bolts lol...

Received my K-Tuned Shifter Plate

Inovative K20 Motor Mounts 60a Shore

STAY TUNED FOR RIDICULOUS UPDATES​

 

[Kiakid]

i like, keep it coming

 

[Mikeb353]

Got some JDM GOODIES received today

The damage, Opened up the package come to find out both of the fenders were heavily dented in. Called the dealer up asap said to shoot him an email with pictures.... Hopefully they can refund me or send me another set :/