Search results

Hey CI, need some opinions, experience and advice. Stuck between two things here. I have a 96 Gsr currently with a b18b1 swap( bought the car as a shell, had the b18b from a donor car for 300$ rear ended) I recently bought an 05 TSX running and driving that was rear ended for 1500$ has no...

Come to find out the trans had too much fluid. I been driving it around all day no problems going into neutral, but slips a little after it gets hot. Going to flush the transmission and put about 3.5 quarts of Honda automatic transmission fluid. Sent from my iFridge using Tapatalk

Hey guys i have a 97 acura integra DB7 automatic with 14x,xxx miles bought the car for 700$ its pretty clean, all stock still. i bought it cause the guy said the tranny, would slip sometimes. i had an extra auto trans from a rear ended auto teg(a 95 dc4) i needed the motor for my 5speed...

I'm really falling toward the b20, if jdm engine depot has one with the p8r head. Oh and here's some pics of her This was at how I had her dressed up for Honda Day 2013 Atco Raceway NJ Sent from my iPhone using Tapatalk - now Free

Hey guys, need some help heres some info about me and my situation. i daily drive a milano red gsr. owned it for about a year, i bought it as just a shell, found a nice gsr transmission for it, gave it a stage 1 exedy organic clutch with a 9lbs ACT flywheel. b18b1 with a gsr tranny. I...

The shell is a 96 and yeah i believe one of my mounts mightve took some damage, any suggestions to what mounts to go with? Hasport is all i heard of Sent from my Easy Bake Oven

Hey names noel. heres my situation, a week ago i crashed my teggy 97 gs model b18b1 5speed i got paid cause it wasnt my fault with the money i found me a nice clean gsr shel no motor or trans. (will post pics later) the frame on my GS was bent some but the motor and trans are good. currently...

hey guys i got a 97 integra gs b18b1 and im looking into going koni/ gc soon but before i lower i want to work on a few other things, i replaced the inner and outer tie rods. i just bought a set of brand new blackworks rear LCAs for 50$ in the box :) I noticed my upper front and lower front...

i want to take the pinstripe off and paint the little bump on the side black. how do i take off the pinstripe? heat gun?

So recently my oil pump went bad got it replaced, then two days after it started misfiring, and oil and anti freeze started to mix, i decided to just get a b18b1 swap from a friend for real cheap, i just got my exedy stage 1 and prolite flywheel from CI :D She still looks the same though.

i don't have either of these but your best bet from what i've ridden in, and expirenced, would have to say Koni Yellow w/ GC or Buddy Club N+ they both give bang for you buck 800-1000 is what you'll end up spending on each, only thing i would look at is if your buddy club if they blow you have...

not bad really its pretty good, for gsr trans with ls 2k i would've picked it up

lol well if they were on a 97 ls they should fit with no problem on yours or he couldve told you just to be rid of them

Lol breadbasket Sent from 20,000 Leagues under the sea using Tapatalk 2

It doesn't smoke, and I had a head gasket done about four months ago, There is a small whoosh sound coming from around where the compression is low. Smells like anti freeze there too. And how would I know if my block is bad? Sent from Your basement using Tapatalk 2

sounds like i could do a leak down test is this what its like? http://www.jspecauto.com/files/jspecautotechcenter9b.htm lol got it from google

dont think so lol since i dont know what a leak down is :???:

Ok lets get started. I got 97' GS tegg, it has a B18A1 5spd. has 194k on the dash, like 170k on the motor lol. Problem here is sometimes she idles good and smooth, others she bogs down at 100-200 RPM. Ran a compression test, i got the first two cylinders at 148-152, now the last two...

Well I'm getting some wheels dirt cheap for what they are, and after the wheels im throwing koni yellows wit ground control, then a fresh full body paint for the new year Sent from my PG06100 using Tapatalk 2

Lol oops wasn't sure Sent from my PG06100 using Tapatalk 2