endo617
Rattle Can Technician
nope, there basics the superstreet and flex come with them and these are extended top hats because im planning on going really low next year
Endo617: Upgrade/Build Thread
- Thread starter endo617
- Start date
DailyDB8
>>>Honda Enthusiast<<<
im debating on what sorta cf spark plug cover to get, most of the weave looks all jacked up.
endo617
Rattle Can Technician
lol very true, im just going to save it for later
Update: I found the only 95 Acura Legend GS calipers(2 piston, equivalent to NSX calipers) in the whole junkyard, i cleaned them up and through some paint, i hate the paint thought it would be a dark silver but it looks like light blue silver, anyway, not much left. OH and P.S. only payed $32 for them
Samurai_Blue
Yolo Whippin'
what do you need to do to run those?
endo617
Rattle Can Technician
ill do an official write up after install, but its easy
95 Legend GS Calipers
Brackets Milled down 2~3mm
Prelude Vtec Rotors Re-drilled to 4x100
optional: good seat belts so you don't chip a tooth
natron84
Member
please do, I'm really curious.
endo617
Rattle Can Technician
Integraguy04
CORNER CARVER
i almost did this on my teg too, it is a really good setup if you want a lot of braking power.
DaddyBuiltRacing
Resident Asshole
Try mini cooper rotors, they are the same size but are 4x100 from the get go 
endo617
Rattle Can Technician
people mentioned the VW Corrado"s are 4x100 11" rotors but only fast brakes has the kit for that, i already have a rotor technical design place around the way the will do them for $100 drilled and slottedTry mini cooper rotors, they are the same size but are 4x100 from the get go
Samurai_Blue
Yolo Whippin'
are the mini cooper rotors 11" oem?
endo617
Rattle Can Technician
:what:
Samurai_Blue
Yolo Whippin'
My bad im dumb its the 07 Mini Non type S the S is 11.5"