My first Integra

BLVD

New Member
What up my racing peeps! Im new to the racing world. I have had lowriders most of my life but love all engines so decided to get something new and fell in love with the 1996 Integra. I pretty much can do most of my work on my own. I have recently installed the hydraulics on my 1970 Monte Carlo and painted my integra octane blue mettalic. I would love to know more about my B18C1. I know that the B18C5 is the best since its from the Type R,but would like to know if I start putting in performance parts in my engine if I need to do anything to it before I do? Like port it? change the cams,valves,springs,etc? So far the integra has a cold air intake manifold, Speedline coilovers,not sure what exhaust but sounds nice,per prev owner it also has a stage 3 cluth but I have not checked. If I install performance headers,intake manifold,fuel system,will it hurt the stock engine? Or were would you recommend I should start?


Thanks for all your help.... :D
 

bdawgxi

DB ftw!
First off, welcome to clubintegra and congratz on the Teg.
The engines are strong, you can do plenty to it while keeping the internals stock.
If I were you I'd get some new headers next since you have the cold air and exhaust already done. Then you can jump to the manifold and fuel.
 

BLVD

New Member
bdawgxi said:
First off, welcome to clubintegra and congratz on the Teg.
The engines are strong, you can do plenty to it while keeping the internals stock.
If I were you I'd get some new headers next since you have the cold air and exhaust already done. Then you can jump to the manifold and fuel.
Click to expand...

cool! Thanks. I was thinking of going a skunk2 but will see.
 


bdawgxi

DB ftw!
No problem, I've been looking at Skunk2 for intake manifold. The site claims some good hp gains but I'm not sure. Guess we'll find out soon huh. haha.
Btw, I checked the picture out. Looks good, does the exhaust angle out or is that the picture?
Cause Megan Racing has the drift spec exhaust that does that, so that might answer your question about the brand of it.
 

BLVD

New Member
bdawgxi said:
No problem, I've been looking at Skunk2 for intake manifold. The site claims some good hp gains but I'm not sure. Guess we'll find out soon huh. haha.
Btw, I checked the picture out. Looks good, does the exhaust angle out or is that the picture?
Cause Megan Racing has the drift spec exhaust that does that, so that might answer your question about the brand of it.
Click to expand...


Yea it angles out to the side. Thanks!
 

8-bit

do what now?
orale. that on the other side of the country!
aqui en GA hay un par de lowriders.
im try take some pics of em.
 
You must log in or register to reply here.
Top