My 94 Integra LS

Integraguy04

CORNER CARVER
update...got some GSR fat fives for just driving around on some all seasons...they look ugly as hell






After a lot of sanding an polish and 10 hrs of work, this is what they look like now

 


Integraguy04

CORNER CARVER
went to the track tonight just got back...previous best was a 13.7, new best is a 13.5 @ 102mph w/ 2.0 60' I ran the car on 225/50/15 toyo R888
 

Integraguy04

CORNER CARVER
Update

So I had been looking at the front splitter combos from Special Project Motorsports for my integra. I talked to Kiwi for about 30-45 minutes yesterday (owner) and it made me want the kit even more. Seeing as how i dont have the 500 dollars for the engineering marvel that they have designed, i figured i would try my own so that is what you will be seeing over the next month or so...i already have a few pictures that i will post up soon

right now i have invested $135...ITR lip 100, plywood 25, paint 10
 

Integraguy04

CORNER CARVER
some pictures of test fitting with cardboard...


Fitting with first design-was too much surface area



Re-Done shaved some off

 


Integraguy04

CORNER CARVER
More Progress




Painted it and test fit it again Now i just gotta make brackets for the splitter (going were tow hooks were originally)


 

Integraguy04

CORNER CARVER
have posted anything for a while so here is what i am planning over the winter

I am going to have the head P&P by kingmotorsports sometime in the next few months, this will include...

P&P on my GSR head
new oem valve guides with bronze inserts
ITR intake valves

I am also replacing my ls/vtec oil feed line and re-running my breather setup
 
You must log in or register to reply here.
Top