My 94 Sedan Build-Up - Lots of Pics = ) [ Updated Constantly... So Stay TUNED!!! ]

russ_playa

New Member
wow, ive been through page 1 to page 38, in im SOOO damn thirsty to see more!!!
awsome work, really loving it, and im kinda getting scared away :S
ill be swaping my USDM to a JDM front, and ill be puting a k20 in mines
i really want that six speed tranny in my teggy :D
but dont bring your hopes up guys, its not gonna be soon, im planning on doing it in winter 2010, but im doing it in 1 winter aka 4 months max!
 

DailyDB8

>>>Honda Enthusiast<<<
russ_playa said:
wow, ive been through page 1 to page 38, in im SOOO damn thirsty to see more!!!
awsome work, really loving it, and im kinda getting scared away :S
ill be swaping my USDM to a JDM front, and ill be puting a k20 in mines
i really want that six speed tranny in my teggy :D
but dont bring your hopes up guys, its not gonna be soon, im planning on doing it in winter 2010, but im doing it in 1 winter aka 4 months max!
Click to expand...
i still dream about that k20... maybe sometime in the future when they are easier to deal with in california.





i haven't been doing too much to the car lately... i kinda lost motivation, priorities changed and i was still undecided on a couple things... then i ran into some parts and went on a shopping spree... lol. so a little whoring at what i've been stacking up so far :p

i've decided i wanted to keep the engine bay looking somewhat stock as possible... to the naked eye 8)


some folks have bullhorns as decorations... i got me a carbon fiber azect grill... :lol:


what do you call 2 black cats with a white stripe down the middle? lol... yea thats right... SKUNK.... TWO! thanks to matt on a couple of the parts and jhp + ebay :thumbs up


still got misc parts lying around the house... ill take pics once they're installed. :thumbup:


thats all for now, next i have my eye on the works hub and rapfix, along with a nice personal steering wheel i've been dying to get. still not sure if i want to go with the skunk2 im setup, looking into edelbrock and i want to go complete im/header/exhaust setup, but who knows what ill ending up going with, thats the fun part... so many to pick from :what:
 
Last edited:

DailyDB8

>>>Honda Enthusiast<<<
a step closer to getting the s2000 cluster swap done! :thumbs up
 


jay8801

New Member
if you dont mind answering what did you have to do to convert your 94 body style to the 98-01 body style
 

JimmyRos.

07 BMW 328Xi
jay8801 said:
if you dont mind answering what did you have to do to convert your 94 body style to the 98-01 body style
Click to expand...
its nothing more than getting a 98-01 rear bumper, 98-01 front bumper, 98-01 headlights, 98-01 corner lights w/ brackets. its a direct replacement. there's no modification needed.
 

jay8801

New Member
JimmyRos. said:
its nothing more than getting a 98-01 rear bumper, 98-01 front bumper, 98-01 headlights, 98-01 corner lights w/ brackets. its a direct replacement. there's no modification needed.
Click to expand...
Thanks
 


DailyDB8

>>>Honda Enthusiast<<<
so0o0o.... updates have stopped because i picked up this sucker. you always hear me say... an integra is a luxury car compared to a civic... well i picked up another civic :p for the deal i got it for, i can't complain. this eg will curretnly take over the daily driver role while i finish up the db. the hardest part will be trying to keep the sucker stock. if anything... gsr block in this sucker... and k20 is the 4dr... muahahaha :twisted: j/k

after a minor detailing... didn't really wash the car since the paint is already faded.


and i got bored so i tried to see what the ride would look like with the VOLKs... btw the volks costs more than the ride :p
 

DailyDB8

>>>Honda Enthusiast<<<
finally some UPDATES for the DB8... lol.

damn civic been robbin me of my teggy time :p had time tnoight to remove the rear seats, and disassemble the roll bar. sucker is pretty heavy. i didn't have enough time to install the bar, but i will need to do a lil mock up make sure its prefect before i start drilling and mout the plates to bolt on. ill prolly start working on the carpet cutout too. get the ball rolling again with the db project, haha.

yea yea... it ain't no TegSOX wire tuck but it was hidden at one point, lol. since i wanna have the battery relocated in the back... i might use the red power wire for fuse box run.



it was sorta fun disassembling the toll bar, haha.



and then some random toys i have lying around in the garage. koyo rad w fal slim fans... then i got a dc5 dead pedal to complete the pedal setup i have.


 
Last edited:

DailyDB8

>>>Honda Enthusiast<<<
thanks guys :thumbup:

so0o after the dinner with the moms on mothers day... i was finally able to finish off roll bar install. and boyeee... if its your first time, its a bitch... took me fuckin ages. easiest thing to do is to remove just about all the panels so that you have enough room to move the bar around and so that you dont scratch any of the panels either. since i was a rookie at this and a couple failures... i'd say about a good 3 hours or less. took me all day since i took my sweet time and found out a couple things the hard way. :p

dd mode, the harness bar and diagonal bar not installed


the whole shibang


perfect fittament! i make this shit look good :twisted:


btw can anyone verify that i installed the base plates correctly? are they supposed to be inside the car or outside like i have it?







along with the roll bar i got started on the custom black carpet. didn't get to finish it, but i got a rough cut out and idea of what i want to trim/cut. overlapped the old carpet ontop of the new one and i used a yellow crayon to do a qucik trace of the middle section. also removing the armrest bracket is helpful too :thumbup: i didn't want to install the roll bar with the carpet yet til i had the roll bar finalized on where it was going to be bolted down. plus the carpet has extra cushion underneath the rear section of the carpet.



wanna cut a hole in my rear leather seats... lol just the side pieces so i can like more pimp in dd mode 8)


this roll bar is definatelly going to add more weight, like another 75'ish lbs... and for folks trying to get in the rear seats, they'll probably have to crawl in, haha. but i like it, decdied to go with the bolt in design for semi dd purposes, but im kinda regretting not buying the complete cage setup. hard to be on the dd aspect with a roll cage. so far so good i guess... i have plans for just about everything, just gotta put it into action. anyone selling a works bell hub setup? lol
 
You must log in or register to reply here.
Top