looks like you got everything. There's no reason why this shouldn't work. Hope you got the right Speedhealer? i heard that they had a "special" made just for us honda people. I think is was Version 4 or something.
I still want to build a completer module. BTW thumbs up to you man.
thanks a lot kong, when i saw the cluster in your car, it really gave me the final push. :thumbup:
bigger ups to you since you're makeing the complete module and programming yourself.
so some UPDATEs!!!
i ordered a dremel the other day... saved a couple bucks, but they dont cost that must at home depot. saw it the other day while i was at work looking for parts. So with the dremel kit and using the fhick cutting disc, i chopped away at the donter cluster for the custom harness i wanna make, and also the carbon fiber bezel. with the variable speed on the dremel... cutting through the plastic was like butter!
onto the PICs!!!
first... the homemade harness... not as simple as the dc5... bastards! 
made a rough outline of what wanted...
then i chopped/sliced away on the donor cluster, and trimmed down what i really wanted. one note is to be very careful with the white plastic. its VERY brittle. so i couldn't really use and hand cutters. it cause some unwanted cracks.
looking on how things are... and to make things easy and functional... i would probably have to soder some wires ontop of the coper on the small portion of the green "back plane" and the wires would come from the back portion... where i probably cutt 1 good thin line so the wires can pass through, rather than small individual holes for each wire. dont you guys agree? that and i also wanna use shrink wrap, spliy flex tubing and make it a clean job.
next... the carbon bezel
make sure you wear gloves, eye protection, and long sleeves! cause that bitch is some ichy stuff! lol... no joke. a stream of watter isn't really needed to keep the carbon fiber dust down... its nothing too krazy. man up about it, haha. placing tape on the panel will make things a lot easier to decide where to start cutting, i centered and traced the card board cut out i made, as well as the plaster bezel, just to get a better visual. i made the outline thicker going towards the center, so i can give myself room for error and use the sander for the demel to smooth it out.
and then chop chop away! i went
there's still a large portion where i need to trim the rest of the surrounding carbon fiber to make it more compact... but i can also use it as mounts of the speedohealer and ect mod. also the center trim that i cutt out... i was sorta thinking about using it as a cover like the dc2 clock cover... muahahaha 8) the carbon fiber layout sorta looks like the carbon faux for the integra type r interior... so thats also next to list to complete my interior
up comming task... the splicing!!!
