tork_sd89
Baywatch
Categories: Best 98-01 Style, Best N/A Integra, Best Overall Integra
Car: 2001 Integra GS-R (original B18C1)
Engine:
-Skunk2 Intake Manifold
-Skunk2 Alpha 70mm Throttle Body
-AEM V2 Cold Air Intake
-Supertech Dual Valve Springs
-Supertech Titanium Retainers
-Supertech Flat Faced Valves
-Supertech Bronze Valve Guides
-Supertech Valve Stem Seals
-Toda Spec B Cams
-Buddyclub Cam Gears
-Gates Racing Timing Belt
-ARP Head Studs
-Comptech USA Header
-Apex-i N1 Cat-back
-AEM 320 Fuel Pump
-Marshall Fuel Pressure Gauge
-Password JDM Carbon Fiber Spark Plug Wire Cover
-Moddiction Burnt Titanium Hardware (Engine Bay)
-Downstar V1 Beauty Washer/ Bolts
-Buddy Club Oil Cap (Black)
-Spoon Resivoir Socks
Engine Management:
-Hondata S100 (Tuned by Elton @ Raceline USA)
Suspension:
-Skunk2 Pro S 2 Coilovers
-Password JDM 3 Point Front Strut Bar
-BWR Subframe Brace
-BWR LCA's
-Energy Suspension Sway Bar Bushings
-Bennen C-pillar Bar
Drivetrain:
-Clutch Masters FX200 Clutch
-Competition Clutch 12lb Flywheel
-Energy Suspension Shifter Bushings
-Honda OEM Manual Transmission Fluid
Exterior:
-Top1 Motorsports License Plate Tilt
-Top1 Front Splitter
-Bayson R USDM ITR Replica Front Lip
-Honda OEM ITR Spoiler
-Limited Edition Honda-Outfit Carbon Fiber Gurney Flap
-Honda OEM Mud Flaps
-Paint Matched Side Skirts
-Bi-Xenon Retrofitted Headlights (Infinity FX35 Projector)
-Clear Corners
-DDM 6000k D2S Bulbs
-DDM 35w Ballast
-DDM LED Switchbacks
-DDM LED Rear Licence Plate Lights
Interior:
-350mm Nardi Deep Corn Steering Wheel (Suede)
-NRG Steering Wheel Tilt
-Blox 490 Spherical Shift Knob (NeoChrome)
-Sony DSX 210X Head Unit
-Rockford Fosgate Speakers (6.5" Components front 6.5" 2-way rear)
-Polk DXi 10" Subwofer
-Hi-fonics Amps (1000watts and 400watts)
-Prosport Amber Gauges (Oil Pressure and Oil Temp)
-Custom Gauge Bezel
-LED Map and Dome lights
-DDM Wedge LED's (Gauge Cluster)
Wheels & Tires:
-Enkei RPF1 (16x7 +43)
-Federal 595 (205/45/16)
-Blox Extended Wheel Studs
-Project Kics 10mm Wheel Spacers (front & rear)
Brakes:
-Brembo Blank Rotors
-Hawk HPS Pads (front & rear)
(170whp 126 ft-lbs) No cam gear adjustment, stock bottom end, CARB legal header and exhaust are restricting power. Plans are in the works for a better flowing exhaust.
(before Nardi install)
(Only pic I have of the Nardi installed)
2014 was a big year for the GS-R. From the head rebuild and Toda cams, to changing up the appearance a bit, it was a good year. Looking forward to what 2015 has in store. Thank you for looking!
Car: 2001 Integra GS-R (original B18C1)
Engine:
-Skunk2 Intake Manifold
-Skunk2 Alpha 70mm Throttle Body
-AEM V2 Cold Air Intake
-Supertech Dual Valve Springs
-Supertech Titanium Retainers
-Supertech Flat Faced Valves
-Supertech Bronze Valve Guides
-Supertech Valve Stem Seals
-Toda Spec B Cams
-Buddyclub Cam Gears
-Gates Racing Timing Belt
-ARP Head Studs
-Comptech USA Header
-Apex-i N1 Cat-back
-AEM 320 Fuel Pump
-Marshall Fuel Pressure Gauge
-Password JDM Carbon Fiber Spark Plug Wire Cover
-Moddiction Burnt Titanium Hardware (Engine Bay)
-Downstar V1 Beauty Washer/ Bolts
-Buddy Club Oil Cap (Black)
-Spoon Resivoir Socks
Engine Management:
-Hondata S100 (Tuned by Elton @ Raceline USA)
Suspension:
-Skunk2 Pro S 2 Coilovers
-Password JDM 3 Point Front Strut Bar
-BWR Subframe Brace
-BWR LCA's
-Energy Suspension Sway Bar Bushings
-Bennen C-pillar Bar
Drivetrain:
-Clutch Masters FX200 Clutch
-Competition Clutch 12lb Flywheel
-Energy Suspension Shifter Bushings
-Honda OEM Manual Transmission Fluid
Exterior:
-Top1 Motorsports License Plate Tilt
-Top1 Front Splitter
-Bayson R USDM ITR Replica Front Lip
-Honda OEM ITR Spoiler
-Limited Edition Honda-Outfit Carbon Fiber Gurney Flap
-Honda OEM Mud Flaps
-Paint Matched Side Skirts
-Bi-Xenon Retrofitted Headlights (Infinity FX35 Projector)
-Clear Corners
-DDM 6000k D2S Bulbs
-DDM 35w Ballast
-DDM LED Switchbacks
-DDM LED Rear Licence Plate Lights
Interior:
-350mm Nardi Deep Corn Steering Wheel (Suede)
-NRG Steering Wheel Tilt
-Blox 490 Spherical Shift Knob (NeoChrome)
-Sony DSX 210X Head Unit
-Rockford Fosgate Speakers (6.5" Components front 6.5" 2-way rear)
-Polk DXi 10" Subwofer
-Hi-fonics Amps (1000watts and 400watts)
-Prosport Amber Gauges (Oil Pressure and Oil Temp)
-Custom Gauge Bezel
-LED Map and Dome lights
-DDM Wedge LED's (Gauge Cluster)
Wheels & Tires:
-Enkei RPF1 (16x7 +43)
-Federal 595 (205/45/16)
-Blox Extended Wheel Studs
-Project Kics 10mm Wheel Spacers (front & rear)
Brakes:
-Brembo Blank Rotors
-Hawk HPS Pads (front & rear)
(170whp 126 ft-lbs) No cam gear adjustment, stock bottom end, CARB legal header and exhaust are restricting power. Plans are in the works for a better flowing exhaust.
(before Nardi install)
(Only pic I have of the Nardi installed)
2014 was a big year for the GS-R. From the head rebuild and Toda cams, to changing up the appearance a bit, it was a good year. Looking forward to what 2015 has in store. Thank you for looking!
Last edited: