Ted's Owner is back in the Honda game -- Nick's '95 Integra LS hatchback
- Thread starter Ted's Owner
- Start date
Ted's Owner
On to Integra number two!
I finally had everything that I needed to go ahead and replace my valve cover gasket and spark plug tube seals, so I did that today. I also painted my timing belt cover and my valve cover, installed some PW:JDM valve cover hardware, and cleaned up my power steering pump and AEM pulley.
Timing belt cover
Valve cover
My power steering pump and my AEM pulley. I cleaned the power steering pump with two coats of carburetor and choke cleaner, then one coat of degreaser. Then, I cleaned the pulley with degreaser and Windex and filled the scratches with a red Sharpie. It looks almost brand new.
Timing belt cover installed
Final product
Timing belt cover
Valve cover
My power steering pump and my AEM pulley. I cleaned the power steering pump with two coats of carburetor and choke cleaner, then one coat of degreaser. Then, I cleaned the pulley with degreaser and Windex and filled the scratches with a red Sharpie. It looks almost brand new.
Timing belt cover installed
Final product
Ted's Owner
On to Integra number two!
Lol. Thanks man. I'll go moar low eventually. I need to finish my maintenance and a few other things first. 8)
Ted's Owner
On to Integra number two!
osiris19
Active Member
I know.
I was trying to sell it before haha. I got it for free from a buddy.I'm waiting on my belt to come in the mail.
Get on it, man!
Ted's Owner
On to Integra number two!
I'd put it on if I were you. I'm pretty sure the pulley is the same size as OEM, just a lighter weight design for less parasitic loss and more efficiency.
Ted's Owner
On to Integra number two!
Hmm. Time for a new alternator? Then, you can just buzz the old pulley off and put the AEM on before installation.
Ganyon
Active Member
Beat me to it. Lol