Integra GS-R ( B16 ) Super lightweight build!

cborden

Jesus is THE way
VtecAid said:
yes i have been looking on both but i can only find the full motor mount kit... rest of my motor mounts are perfect..
Click to expand...
you need a mount? The one that bolts up to the tranny directly to the frame on the passenger side? I have an oem one, if thats what you want/need. pm me
 

Army74D

gtavila_
VtecAid said:
Allrighty ordered a Oem Replica Header off of Ebay for 120$ Stainless Steel and tubing is a little bit larger , also it's a one piece design and lighter...

Click to expand...
Run a flex pipe.. This thing is gonna break in no time. :???:
Shoulda searched craigslist for a used DC header for $120.
 

VtecAid

New Member
Army74D said:
Run a flex pipe.. This thing is gonna break in no time. :???:
Shoulda searched craigslist for a used DC header for $120.
Click to expand...
Im allready running a flex pipe ;) It's been holding up really good .. and every1 at the meets love it... lol
only bought it in the mean time since i have plans for a turbo...
 


VtecAid

New Member
Hey guys ... ! Im finally getting my car painted hopefully this weekend... I really love all shades of blue and turquoise is prob my favorite especially on integras <3 .. So my friend thats going to help me paint it came across this awesome chromabase color that has been sitting in his shed since 2004 ... 0.0 His dad used to own a touch up shop... So my question is , can i still use this paint? Will it chip or fade after a while? The paint hasn't been opened since... Its a gallon..
 

Ted's Owner

On to Integra number two!
VtecAid said:
Hey guys ... ! Im finally getting my car painted hopefully this weekend... I really love all shades of blue and turquoise is prob my favorite especially on integras <3 .. So my friend thats going to help me paint it came across this awesome chromabase color that has been sitting in his shed since 2004 ... 0.0 His dad used to own a touch up shop... So my question is , can i still use this paint? Will it chip or fade after a while? The paint hasn't been opened since... Its a gallon..
Click to expand...
I'm not sure if it's still usable, but I can tell you almost for certain that you'll need probably another gallon or two. It took the painter 3 gallons to do mine, but mine is a four door, so it may not take as much for yours.
 

osiris19

Active Member
You'll need at least two, three to do proper coats.

Sent from my Incredible 2 using Tapatalk
 


VtecAid

New Member
Ted's Owner said:
I'm not sure if it's still usable, but I can tell you almost for certain that you'll need probably another gallon or two. It took the painter 3 gallons to do mine, but mine is a four door, so it may not take as much for yours.
Click to expand...
I don't think so my friend painted a prelude before and it took him less than 3/4 of a gallon. And he did 4 coats of paint and 3 coats clear... Also my BMW only took a gallon.. I really doubt it will take more than half.. I know painters charge for extra paint even when they wont need it.. I don't mean anything but I'm not sure how much you trust him...

DaddyBuiltRacing said:
Lmfao you don't need a gallon. You need 2 quarts, that reduces down to 1 gallon. I sprayed my entire 4dr including all jams, underside of hood/trunk and engine bay with 2 quarts.
Click to expand...
 
Last edited:

VtecAid

New Member
Finally some braking power and exterior mods...

Spyder Halo Projectors , smoked turn signals

Russell Stainless Steel Brake lines

Brembo front and rear Rotors Oem Size

 

VtecAid

New Member
BigMac88 said:
Nice. What pads are you running?
Click to expand...
I have no idea , they are still the same ones from the previous owner , and they still look like they have lots of life left , I will change them if i still don't like the brake feel after these upgrades ..
 

VtecAid

New Member

osiris19

Active Member
VtecAid said:
Guys i think it's time for a new clutch as well , gears ( especially 4th ) started slipping bad and the clutch bearing is making noise on high gears at partial throttle... So i found this kit on ebay and thought it was just what i needed. Very good price as well.. Should i go for it or not ?

http://www.ebay.com/itm/EXEDY-CLUTCH-KIT-SET-FIDANZA-FLYWHEEL-CR-V-INTEGRA-CIVIC-Si-delSol-DOHC-VTEC-/400506973040?pt=Motors_Car_Truck_Parts_Accessories&fits=Model:Integra&hash=item5d40136b70&vxp=mtr
Click to expand...
Exedy is OEM. Very good company to buy clutches from. I'm running one now. No complaints.

Sent from my Nexus 7 using Tapatalk
 

Aussie

Zoom-Zoom
VtecAid said:
Guys i think it's time for a new clutch as well , gears ( especially 4th ) started slipping bad and the clutch bearing is making noise on high gears at partial throttle... So i found this kit on ebay and thought it was just what i needed. Very good price as well.. Should i go for it or not ?

http://www.ebay.com/itm/EXEDY-CLUTCH-KIT-SET-FIDANZA-FLYWHEEL-CR-V-INTEGRA-CIVIC-Si-delSol-DOHC-VTEC-/400506973040?pt=Motors_Car_Truck_Parts_Accessories&fits=Model:Integra&hash=item5d40136b70&vxp=mtr
Click to expand...

I can't recommend a fidanza flywheel. It's annoying companies even pair Exedy clutches up with them for sales. Exedy makes prob the best flywheel for our cars.

I've got a stage 2 and flywheel for sale if your interested.
 
You must log in or register to reply here.
Top