Integra GS-R ( B16 ) Super lightweight build!

VtecAid

New Member
Ted's Owner said:
Montgomery is a little ways from me, but I love cruising to car meets. I actually helped organize one in my area and they meet every Saturday night. I haven't been going lately because it's been too cold.
Click to expand...
That's cool. Yea i would love to hang out with some enthusiasists , meet new people and discover whats around and what to do? Any good track's around? And need to find parts vendor and tuner as well :D
 

Ted's Owner

On to Integra number two!
VtecAid said:
That's cool. Yea i would love to hang out with some enthusiasists , meet new people and discover whats around and what to do? Any good track's around? And need to find parts vendor and tuner as well :D
Click to expand...
It depends on where you'll be located. Lol. I'm not familiar with Montgomery. I do know that there is a tuning specialist in Atlanta, Georgia by the name of Trackmasters. It's a four hour drive from where I am, but I have a lot of friends who do the drive quite often and they say that he's definitely worth it.
 

Samurai_Blue

Yolo Whippin'
VtecAid said:
yep ik :p i talked to a friends mechanic to help me out but it never actually happened ... how long would it take for a person to do abs delete if they knew what they were doing and if you had it done how much would it cost? i dont trust myself to go in there blindly and yank stuff out and replace lines..
Click to expand...
4040 prop valve is about $200 from Acura. lines are like $40 from the junk yard, i used one off an eg. you need a line bender, cutter and a flair tool.
one of the lines from the prop valve needs the bigger fitting from the old line.


you just start at the abs unit and disconnect everything and move your way up. its easy i did it blind. 2 hour job
 

VtecAid

New Member
Ted's Owner said:
It depends on where you'll be located. Lol. I'm not familiar with Montgomery. I do know that there is a tuning specialist in Atlanta, Georgia by the name of Trackmasters. It's a four hour drive from where I am, but I have a lot of friends who do the drive quite often and they say that he's definitely worth it.
Click to expand...
4 hour drive is nothing to me... Would be more fun on the way back testing it out! :p
 


VtecAid

New Member
Samurai_Blue said:
4040 prop valve is about $200 from Acura. lines are like $40 from the junk yard, i used one off an eg. you need a line bender, cutter and a flair tool.
one of the lines from the prop valve needs the bigger fitting from the old line.


you just start at the abs unit and disconnect everything and move your way up. its easy i did it blind. 2 hour job
Click to expand...
hmm sounds alot easier than other people made it sound haha ... Wouldn't the prop valve from a junker work as well or is it better to buy a new one? Also if new is better i have a friend that works at honda dealership ( he can give me discounts on oem , would they have it? )
 

Integraguy04

CORNER CARVER
^ it's not bad to do it - the performance shop I go do he does this a lot for people and he has pre made stainless lines for the front. I bought it from him with all the fittings for like $125 and it fit really good


Sent from my iPhone 4S
 

VtecAid

New Member
Can anyone help me find an OEM transmission mount? Went to 2 junkyards today couldn't find anything and all i see online is the whole motor/tranny mount kits for over 300 bucks...
 

Ted's Owner

On to Integra number two!
VtecAid said:
wait lied about what where they are located?
Click to expand...
Yeahhh. On accident. I thought they were in Georgia for some reason. They're in Huntsville.
There is also a tuning specialist about 5-10 minutes from me who only charges $65/hour and does awesome work. I'd recommend him over Trackmasters.
 

94RS

No fucks given.
RockAuto definitely has trans mounts, granted they're not OEM, but I do remember seeing them when I was looking for new mounts for myself.
 
You must log in or register to reply here.
Top