My 1996 Acura Integra LS

justjdm

DB8 Whore
Better off taking the whole spindle off and bringing it into s shop who can fix it. Them hubs are a bitch to get off without the right tools! Good luck man, hope you get her fixed!
 

osiris19

Active Member
I can't seem to get the upper and lower ball joints loose. Do I just have to keep hammering at the control arms?

Sent from my Incredible using Tapatalk 2
 

justjdm

DB8 Whore
I can't seem to get the upper and lower ball joints loose. Do I just have to keep hammering at the control arms?

Sent from my Incredible using Tapatalk 2
If you have a extra nut to put on the ball joints, just put them on enough and use a hammer to beat them off so you dont mess up the threads. If that don't work, advance auto or auto zone sells a tool used to take off ball joints. It slides in between the spindle and ball joint and all you gotta do is hit it with a hammer to seperate them.
 

TheCrimsonStar

New Member
If you have a extra nut to put on the ball joints, just put them on enough and use a hammer to beat them off so you dont mess up the threads. If that don't work, advance auto or auto zone sells a tool used to take off ball joints. It slides in between the spindle and ball joint and all you gotta do is hit it with a hammer to seperate them.
Yeah..get the separator tool. Lol. When I went to change my axles I could not for the life of me get the joints loose. Then my dad walks out, looks at what I'm doing, shakes his head and tosses me the tool. Took me 30 seconds to get the joint loose with it.

Sent from my GameBoy Color using Tapatalk.
 


osiris19

Active Member
I'm sending it in so they can properly press the hub out.

Sent from my Droid Incredible using Tapatalk 2
 

osiris19

Active Member
Haven't updated this in awhile. Had the front end overhauled, brand new ball joints control arms, hubs, the works. Now I'm trying to find someone to buy it cause I wanna get out of automatic and go five speed.




Dead battery. $85 for a new one. Lovely.

Sent from my Droid Incredible using Tapatalk 2
 

osiris19

Active Member
Since I haven't updated it in forever, I'll throw some current pics of it. It's going up for sale in a few weeks.





 


osiris19

Active Member
Yeah. It wasn't starting one day and I went to kick the tire and slipped.

Sent from my ADR6300 using Tapatalk 2
 
Top