My '95 GSR first time show

480codyGSR

New Member
I bought this integra about 2.5 months ago. Paid 3,000 for it cluster says 240XXX but it's not the original cluster so miles are unknown, car still runs strong and head looks to be rebuilt recently "last 15,000 miles".

The car came with a street tune on chrome as well a Junk2 ITR replica IM. And a no-name intake.

Since I have put:
Cheap 4-2-1 header
Invidia test pipe 70mm
Piece together exhaust with canister muffler (I like the sound)
Competition Clutch st. 2 clutch kit
Fidanza 7.5lb lightened flywheel

Future plans:
Wheels and tires
FPR w/ gauge
Slightly bigger injectors
Mild cam or turbo set up undecided
Strut tower bars(front, rear, upper&lower)
C-pillar bar
LCA's and front camber kit (already has rear)




Have a video clip of my exhaust but this app won't allow me to post it

Here's what it looked like when I bought her
 
Last edited:

Samurai_Blue

Yolo Whippin'
-____- oops didnt edit your post clicked the wrong thing on your post...just wanted to see why the images didnt load for me haha

isnt a 70mm test pipe too big for your car what header do you have?
Also remember when adjusting your fpr you want to retune it
 

Samurai_Blue

Yolo Whippin'
XjoEnX said:
You and Gbaby are going to be best friends.

I can't see pics either but it all sounds like a sweet setup.
Click to expand...
lool skunk2 is a good company IMO. i made power with skunk2 products. But anyways i get a 404 error when i look up the photo using its web address
 


480codyGSR

New Member
Samurai_Blue said:
isnt a 70mm test pipe too big for your car what header do you have?
Also remember when adjusting your fpr you want to retune it
Click to expand...
I have a header from a company derived from Megan Racing.... It is a little off as my exhaust is 2.5 to the rear. I plan to replace with a 4-1 header that some guy is selling on here that has really good clearance and I will dyno tune when I get the fpr injectors and TB.




Sent from my iPhone using Tapatalk
 

480codyGSR

New Member
Samurai_Blue said:
lool skunk2 is a good company IMO. i made power with skunk2 products. But anyways i get a 404 error when i look up the photo using its web address
Click to expand...
So what's the problem? I don't really understand... Size or something?



Sent from my iPhone using Tapatalk
 

Samurai_Blue

Yolo Whippin'
480codyGSR said:
I have a header from a company derived from Megan Racing.... It is a little off as my exhaust is 2.5 to the rear. I plan to replace with a 4-1 header that some guy is selling on here that has really good clearance and I will dyno tune when I get the fpr injectors and TB.




Sent from my iPhone using Tapatalk
Click to expand...
so you have a 2.5" flange on the header side then?

480codyGSR said:
So what's the problem? I don't really understand... Size or something?



Sent from my iPhone using Tapatalk
Click to expand...
the problem probably is they dont exist, the images give me a 404 error
 


480codyGSR

New Member
That's not possible they are in my camera roll so they exist I'll try again. And I think the header I have has a 2.25 collector but I was told it was 2.5 I plan to replace with the one on this forum some where.


Sent from my iPhone using Tapatalk
 

480codyGSR

New Member
Oh ok I have no idea why it won't work I'm still trying... I think it says I have to pay for more picture uploads.


Sent from my iPhone using Tapatalk
 

480codyGSR

New Member
Bump.... Pics are loaded now what do you think?

Also just put a type r strut bar on today. 40 bucks. Car cornered like shit without one.


Sent from my iPhone using Tapatalk
 

480codyGSR

New Member
I'm looking for others opinions on wheel and tire combos, I know what look I want but not exactly what ones to get. Any opinions would be helpful. I want either 16 or 15's. Probably 8 width. With 50 tall rating. But I can't choose between the xxr 531's polished/platinum i believe they call it, the rota slips polished, or the jmags polished. I can think of any other finish that would look well on this paint to me it just looks like a luxury paint color for silver white black or gold/bronze. Maybe gun metal but what do you guys think about the polish?


Sent from my iPhone using Tapatalk
 

480codyGSR

New Member
Since, have installed the clutch and flywheel (stage 2 competition clutch and fidanza flywheel)

New VC gasket kit (had oil on plugs)

Just purchased high beam overlays and motor mount kit. Not any special motor mounts just replacement pieces with one upgraded mount (drivers side mount, I believe) should have them delivered and mounted next weekend.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Top