My '95 GSR first time show

[480codyGSR]

I bought this integra about 2.5 months ago. Paid 3,000 for it cluster says 240XXX but it's not the original cluster so miles are unknown, car still runs strong and head looks to be rebuilt recently "last 15,000 miles".

The car came with a street tune on chrome as well a Junk2 ITR replica IM. And a no-name intake.

Since I have put:
Cheap 4-2-1 header
Invidia test pipe 70mm
Piece together exhaust with canister muffler (I like the sound)
Competition Clutch st. 2 clutch kit
Fidanza 7.5lb lightened flywheel

Future plans:
Wheels and tires
FPR w/ gauge
Slightly bigger injectors
Mild cam or turbo set up undecided
Strut tower bars(front, rear, upper&lower)
C-pillar bar
LCA's and front camber kit (already has rear)

Have a video clip of my exhaust but this app won't allow me to post it

Here's what it looked like when I bought her

 

[Samurai_Blue]

-____- oops didnt edit your post clicked the wrong thing on your post...just wanted to see why the images didnt load for me haha

isnt a 70mm test pipe too big for your car what header do you have?
Also remember when adjusting your fpr you want to retune it

 

[XjoEnX]

The car came with a street tune on chrome as well a Junk2 ITR replica IM. And a no-name intake.

You and Gbaby are going to be best friends.

I can't see pics either but it all sounds like a sweet setup.

 

[Samurai_Blue]

You and Gbaby are going to be best friends.

I can't see pics either but it all sounds like a sweet setup.

lool skunk2 is a good company IMO. i made power with skunk2 products. But anyways i get a 404 error when i look up the photo using its web address

 

[480codyGSR]

isnt a 70mm test pipe too big for your car what header do you have?
Also remember when adjusting your fpr you want to retune it

I have a header from a company derived from Megan Racing.... It is a little off as my exhaust is 2.5 to the rear. I plan to replace with a 4-1 header that some guy is selling on here that has really good clearance and I will dyno tune when I get the fpr injectors and TB.




Sent from my iPhone using Tapatalk

 

[480codyGSR]

lool skunk2 is a good company IMO. i made power with skunk2 products. But anyways i get a 404 error when i look up the photo using its web address

So what's the problem? I don't really understand... Size or something?



Sent from my iPhone using Tapatalk

 

[Samurai_Blue]

I have a header from a company derived from Megan Racing.... It is a little off as my exhaust is 2.5 to the rear. I plan to replace with a 4-1 header that some guy is selling on here that has really good clearance and I will dyno tune when I get the fpr injectors and TB.




Sent from my iPhone using Tapatalk

so you have a 2.5" flange on the header side then?

So what's the problem? I don't really understand... Size or something?



Sent from my iPhone using Tapatalk

the problem probably is they dont exist, the images give me a 404 error

 

[480codyGSR]

That's not possible they are in my camera roll so they exist I'll try again. And I think the header I have has a 2.25 collector but I was told it was 2.5 I plan to replace with the one on this forum some where.


Sent from my iPhone using Tapatalk

 

[Samurai_Blue]

they dont exist on the taptalk server which gives a 404 error

 

[480codyGSR]

Oh ok I have no idea why it won't work I'm still trying... I think it says I have to pay for more picture uploads.


Sent from my iPhone using Tapatalk

 

[480codyGSR]

Bump.... Pics are loaded now what do you think?

Also just put a type r strut bar on today. 40 bucks. Car cornered like shit without one.


Sent from my iPhone using Tapatalk

 

[TheCrimsonStar]

Looks awesome man. I love that color blue on tegs.

Sent from my GameBoy Color using Tapatalk.

 

[480codyGSR]

Looks awesome man. I love that color blue on tegs.

Sent from my GameBoy Color using Tapatalk.

Thanks I like it too, other than it looks kinda purple depending on the lighting and other situations.


Sent from my iPhone using Tapatalk

 

[480codyGSR]

I'm looking for others opinions on wheel and tire combos, I know what look I want but not exactly what ones to get. Any opinions would be helpful. I want either 16 or 15's. Probably 8 width. With 50 tall rating. But I can't choose between the xxr 531's polished/platinum i believe they call it, the rota slips polished, or the jmags polished. I can think of any other finish that would look well on this paint to me it just looks like a luxury paint color for silver white black or gold/bronze. Maybe gun metal but what do you guys think about the polish?


Sent from my iPhone using Tapatalk

 

[480codyGSR]

Since, have installed the clutch and flywheel (stage 2 competition clutch and fidanza flywheel)

New VC gasket kit (had oil on plugs)

Just purchased high beam overlays and motor mount kit. Not any special motor mounts just replacement pieces with one upgraded mount (drivers side mount, I believe) should have them delivered and mounted next weekend.


Sent from my iPhone using Tapatalk