Getting tuned...hp poll!

How much whp will I make :)


  • Total voters
    35

thenoxus1

Quick-Spool Racing LLC
Lol mines the next recent all motor build to dyno. 3-5 weeks lol. Jeff uses a ramp rate and correcting factor for accurate whp ratings btw Dylan.
 

SexySSBP

Kwicherbichen
Lol...I'm driving, will post later. Dylan, my compression was 225...that may be the problem :/ I need to do a leak down.
 

Samurai_Blue

Yolo Whippin'
Lol...I'm driving, will post later. Dylan, my compression was 225...that may be the problem :/ I need to do a leak down.
on all 4? or just 1?
if its all 4

If its just 1 that would reveal something about a bad valve etc if its all 4 that is of some concern, but that would mean that all your pistons are at the same page which is good.
 

Samurai_Blue

Yolo Whippin'
Now im not an expert at this so take it with a grain of salt:
All 4 pistons seem to be within spec..
I would believe your piston rings are sealed by now. The piston rings may not have sealed correctly during break in causing the loss in compression resulting in loss of power. thats just a guess and any guess at this point is as valid as the next.
 

SexySSBP

Kwicherbichen
Could be. It seems the oil rings are fine...0 smoke whatsoever...a leak down should tell me. For right now, my sunroof is down, music cranked, and I just lit one up...life goes on :)
 
Top