FireFro
New Member
Ive got a 1990 Acura Integra with the B18A1 motor, standard transmission. Here is my problem:
I start the car in the morning and drive to work. After it gets to running temp and i stop at a stop sign or light the rpms will go up and then drop back down, goes up then back down.
Ive installed a new pump about 3 years ago but havn't drove for 2 years after that. I started to drive it again once the snow melted. It has a brand new distributor, main relay.
Ive heard they have a little diaphram on the intake for cold starts. Could it be that?
The only thing ive installed in the last few days was a 800watt amp and sub.
Has anyone had this issue before, and what did you do to fix it.
I start the car in the morning and drive to work. After it gets to running temp and i stop at a stop sign or light the rpms will go up and then drop back down, goes up then back down.
Ive installed a new pump about 3 years ago but havn't drove for 2 years after that. I started to drive it again once the snow melted. It has a brand new distributor, main relay.
Ive heard they have a little diaphram on the intake for cold starts. Could it be that?
The only thing ive installed in the last few days was a 800watt amp and sub.
Has anyone had this issue before, and what did you do to fix it.