UKDM ITR Cluster Installed [PICS INSIDE]

nautica_t

New Member
swap the green film at the back of your old cluster and put it onto this cluster.

its tedious work but it'll fix all your problems.
 

g3teg97

Super Moderator
DailyDrivenDB8 said:
haha looks like you need to de-pin some wires and re-pin it.
Click to expand...
Basically. It's not 100%, but I'd say its at 95%, just for the simple fact of the temp needle. It's weird because when I flick the plastic right on it sometimes it goes up, other times I just bang on the dash right above it and other times when I get it on it, it goes up. Werid.
 

g3teg97

Super Moderator
nautica_t said:
swap the green film at the back of your old cluster and put it onto this cluster.

its tedious work but it'll fix all your problems.
Click to expand...
I saw the DIY on H-T, but I didn't know if I needed to do that or not. I just hope I don't rip the green film. :shock:
 


Kuchtaboy

Unregistered User
g3teg97 said:
Basically. It's not 100%, but I'd say its at 95%, just for the simple fact of the temp needle. It's weird because when I flick the plastic right on it sometimes it goes up, other times I just bang on the dash right above it and other times when I get it on it, it goes up. Werid.
Click to expand...
Ha! Sounds like my climate control lights. I give the dash a good wack and the lights will turn on. lol
 

nautica_t

New Member
i had to do it with my cluster as well, cause i'm not sure what year it came from, obd bull shit. so i swapped the green film and it worked like a charm.

its very easy to do, but as mentioned very tedious because you have to remove all the bulbs and all the screws at the back.

everything worked for me when i just plugged it in, but temp wasn't working period and when i signal and press the brake my tach will jump sometimes and if i had the handbrake up, it'll light up as if my hazards are on.
 

g3teg97

Super Moderator
Kuchtaboy said:
Ha! Sounds like my climate control lights. I give the dash a good wack and the lights will turn on. lol
Click to expand...
Mine do that too, but I'm planning on replacing bulbs and making that amber as well. My Alpine CD player lights up amber so I just need the climate control amber then I'm set. 8)
 


g3teg97

Super Moderator
nautica_t said:
i had to do it with my cluster as well, cause i'm not sure what year it came from, obd bull shit. so i swapped the green film and it worked like a charm.

its very easy to do, but as mentioned very tedious because you have to remove all the bulbs and all the screws at the back.

everything worked for me when i just plugged it in, but temp wasn't working period and when i signal and press the brake my tach will jump sometimes and if i had the handbrake up, it'll light up as if my hazards are on.
Click to expand...
Looks like I have a new DIY project coming up this weekend.
 

DailyDB8

>>>Honda Enthusiast<<<
Kuchtaboy said:
Ha! Sounds like my climate control lights. I give the dash a good wack and the lights will turn on. lol
Click to expand...
haha yours does that too? a good smack solves everything :thumbup:
 

DailyDB8

>>>Honda Enthusiast<<<
oh it can go to 8k... but his rev will bounce @ 6k or watever it redlines at... if thats what you meant, haha yea it'll be pretty funny :lol:
 
You must log in or register to reply here.
Top