lilsilverflip
DunkedDA9
So, I am looking to but a new throttle body on my 92 LS but i dont know what size to buy? Right now i just have most of the bolt ons. Intake,headers,exhaust,intake manifold. Does any one know what i should get? Thanks
Throttle Body?
- Thread starter lilsilverflip
- Start date
-
- Tags
- 1992 size throttle body
Samurai_Blue
Yolo Whippin'
you dont need one unless you have cams. I suggest a dyno tune to get your AF back in order due to the intake manifold
heritage36
New Member
Yeah, it really doesn't make much of a difference. I never really upgrade my throttle bodies on hondas. I am putting a 65mm one which is slightly bigger on my new setup, but only because it is going to be pretty well built and have bigger cams and all. You could probably get a type R one maybe without throwing anything too far off, but samuraiblue is probably right in that tuning and tuning software would be a more worthwhile way to spend the money really.
lilsilverflip
DunkedDA9
Samurai Blue: Looks like your in Nor Cal where could i get a good Dyno Tune at?you dont need one unless you have cams. I suggest a dyno tune to get your AF back in order due to the intake manifold
Samurai_Blue
Yolo Whippin'
DNR i think thats in sfSamurai Blue: Looks like your in Nor Cal where could i get a good Dyno Tune at?
red zone in sj
theres places in sacramento
but since you are in the bay there are plenty of shops.
lilsilverflip
DunkedDA9
So whats would happen if i did not get a Tune? BTW this site is fucking awesome every body seems to know alot of information!
Samurai_Blue
Yolo Whippin'
you can potentially run lean and thats bad for your rings
Samurai_Blue
Yolo Whippin'
on stock internals you should run a stock intake manifold or a ITR styled one by skunk2 or blox.
Samurai_Blue
Yolo Whippin'
do you have a stock motor?
you are going to run retarded lean with a 70mm tb...
you are going to run retarded lean with a 70mm tb...
lilsilverflip
DunkedDA9
To get a Tune does my car need to chipped?you dont need one unless you have cams. I suggest a dyno tune to get your AF back in order due to the intake manifold
Samurai_Blue
Yolo Whippin'
chrome is the cheapestTo get a Tune does my car need to chipped?
hondata IMO is the best
chrome is similar but is a chip which you can reburn. Its a free program as well
well a 60mm throttle body bolts up as well...the opening for the skunk2 pro series intake manifold is 64mm. Unless you are putting down serious power you dont need to go above a 65No exactly stock but 70 mm throttle body fit on Skunk2 intake manifol
lilsilverflip
DunkedDA9
chrome is the cheapest
hondata IMO is the best
chrome is similar but is a chip which you can reburn. Its a free program as well
well a 60mm throttle body bolts up as well...the opening for the skunk2 pro series intake manifold is 64mm. Unless you are putting down serious power you dont need to go above a 65
So I DO need to chip my ECU? In order to tune it for the Skunk 2 Intake Manifiold that i have?