Tegsox 2005 Civic 3 amp system (56K...)

TegSox

Super Duper Moderator
By the end of May I guess. It's gonna be a busy spring. I'm putting a big system into a 2003 GTI this spring too.
Yesterday, I did make plates for the rear mids to go into the stock 6x9 holes:
 

TegSox

Super Duper Moderator
Started upgrading the OEM grounds, and a bigger power wire to run from the alternator to the battery:



0ga from the block to the body.
0ga from the battery neg. to the block.
4ga from the alternator to the battery pos. Using 4ga becuase I'm keeping the 10 guage OEM wire as well, using them both.
 

TegSox

Super Duper Moderator
Finished up under the hood. And did an upgrade I origionally didn't plan on doing, new battery terminals.

Phoenix Gold terms:


The 4ga at the alternator:




 

TegSox

Super Duper Moderator
The new rear speakers, 6.5 mids:


Alpine 7977, PPI QBass knob, sub amp on/off switch, amp fans switch:


Hinged trunk board:


Haven't taken a pic of the rear tweets yet, I'll get some.
 

AcurInteg96

Just call me chris.
i was gonna do the hinged thing so i can get to my spare. only i was gonna use a really nice piece of not particle board. but that really nice looking plywood. think that would work? i was just gonna use the old trunk floor as a template.
 

TegSox

Super Duper Moderator
That's the OEM trunk board I hinged. But that is a good idea if you don't want to cut your OEM board, use it as the template and there you go. I didn't mind cutting mine. It's just a trunk board, I can make a new one.
 

TegSox

Super Duper Moderator
Finally got around to taking some shots of the rear tweet install.



Here's a new shot of the fronts.


QBass knob cord plugs in here.


Alpine 7977 in car.

 

TegSox

Super Duper Moderator
Bought the JL grill for the W6:


After a year, I finally killed the stock battery, replaced it with an Optima:




 
You must log in or register to reply here.
Top