Spooled up Racing's 94' Integra build.
- Thread starter SpooledupRacing
- Start date
mikenichol123
facebook= mnichol3
hey just was wondering when is gonna be the next meet??
SpooledupRacing
Banned
BAHAHAHA... it looks more so now then ever
<~~~~~~shakes head
I cant wait to get the read done.. I can tell u even now though it already handles better and I like the springs.. not tucked but DAMN CLOSE.. I hope it lowers a touch more in the front once the whole car is lowered.
SpooledupRacing
Banned
I havent put it to thought yet.. just trying to catch up with my recent problems so I will let u know.
SpooledupRacing
Banned
Just bought 50.00 worth of bolts from my dealer for the control arms and the camber bar..
next to buy control arms and BLOX adj/ camber link
next to buy control arms and BLOX adj/ camber link
Samurai_Blue
Yolo Whippin'
Here we are dropping the back of the car on new years eve...9 hour job like i said in an earlier post...FUN AS HELL!!!!!!
Just some of the parts and tools we used for this project
car up on jack stands
few shots of Alex Pado (wite2nr) sawing the LCA bolts off (they were seized and rusted in the LCA
Sawsall time
Project took up most the day and went long into the night
Final bolt, just needed to be drilled out
My Driver side rear lca after operation
few shots of what we had to cut/drill
One side had actually snapped from before i bought it and had been rusted, thankfully no one was hurt when i was driving them, (i believe it was rusted due to my car being from NY)
My car a little lower with the tokicos installed in the front, dropped them a little more (getting smogged)
Ill post more pics when i get my car back
this is from my build
SpooledupRacing
Banned
WOW... nice..
Samurai_Blue
Yolo Whippin'
:roll::roll: just sharing experience jeeez adel... dont hate cause im dumped <3
get ready for fun :thumbs up 9 hours of work for just the back on a new years eve
SpooledupRacing
Banned
Well I spent 7 hours on the fronts and trying to get the drivers rear off then I quit..
next time I will prolly spend like 2 hours or less doing it all because I will have all new bolts etc.
SpooledupRacing
Banned
Ok pics as of about 15 minutes ago.
this picture is bad because u cant actually see the top of the tread.. but I can only get 1 finger in there TIGHT.. so less then 1/2" between tread and wheel well
this picture is bad because u cant actually see the top of the tread.. but I can only get 1 finger in there TIGHT.. so less then 1/2" between tread and wheel well
Last edited:
SpooledupRacing
Banned
about 10 minutes before we pulled it into the garage to start
