Spoiler Delete (rear)?

[.Cortez]

I see allot of clean Integra's without a spoiler, Im thinking about taking myin off. I think it would look pretty clean! But im afraid theres going to be holes and such. Complete noob to body work and such. Any information?

 

[ITRnarcotic]

well for the holes if you want to do it the correct way and make it last you want to have the holes welded shut. If you use bondo or such it will cover the holes but i guaranty you it will not last. the only think i would semi suggest if you do not go the welding route, use fiberglass. Its still not as good but it will be stronger and last longer than bondo/body puddy. But the safest, best, most durable way to do it is have the holes welded. then sand it down smooth, primer and paint it

 

[jeepers94]

I say keep it but thats just my opinion.

 

[ITRnarcotic]

I took mine off and shaved all my emblems. It's alot of work if your up to it.

 

[IntegraGstypeR]

if yours came with a wing stock keep it that way. regular integra wings and ITR wings just make the integraz look B_E_A_utiful.

 

[JDMsneakerz]

i wanted my wing temporary plugged, cause i know later i would want my wing back on..i searched and found from clubrsx

http://forums.clubrsx.com/showthread.php?t=556035

 

[Campanelli]

If you could find a wingless hatch for cheap you could just swap them out. To my best knowledge after you welded the holes shut you would have to paint again, so you could just paint the new hatch and that would be easier

 

[G3GirL]

the proper way to go wingless is to get the holes welded shut after you take the spoiler off. no fiberglass, no fillers. on the hatch, it gets slammed too much for that.

 

[99sil-teg]

I removed mine and right now I am using pinstriping (keeps water out) rubber plugs would work too, it is a temporary deal till I get mine painted... then its all getting shaved.

 

[amaestre32]

keep it keep it lol

 

[99sil-teg]

keep it keep it lol

factory spoiler = fail

 

[00DC2]

I took mine off too and i shaved off the emblems. Its really up to you.

 

[Tam4511]

i took mine of and just have the holes, and really want some plastc/ruber plugs for em, any 1 know where the hell to buy em for a 94 gsr?

 

[BrokenTalon27]

i took mine of and just have the holes, and really want some plastc/ruber plugs for em, any 1 know where the hell to buy em for a 94 gsr?

Dude, look at the date on the previous post....you're about 6 months late.

 

[hotdoghogie]

yeah he keeps bringing up old threads for some reason...