Sneak peek at it

madnessknight89

New Member
Ok so before someome calls bs id like to retract my former statement it is not stroked its only bored out to 2.2L (85mm) I talked to the shop who built the block.
 

Nick_C78

New Member
Boring 1mm more won't make it 2.2L its actually only 2.02L.

By the way....just so you aren't devastated when it happens, 85mm stock b20 sleeves isn't safe for boost. Technically isn't even safe for all motor. Just warning you that the sleeves are now a ticking time bomb. Not hating on your build...just watch out
 


madnessknight89

New Member
Ok im just going to use mm for now on... my math must be really shitty lol but the according to benson there should be know problem we told them every thing that we planned to do. they know we are using 10.5:1 piston heads plan to boost around 20 lbs on e85 and there words were "o yea thats not even pushing it" and sleeves are rated to almost never drop or benson will build a new engine for us
 

Muckman

Not a M0derator
Yes you can see the benson stamped block in the first post.

What crank you are using? 89mm B20?
85mm x 89mm = 2020cc
 


You must log in or register to reply here.
Top