Short Ram Intake Shootout.

[GSRIntegra]

I have an Injen SRI and I like it. I can't really compare it to anything since i haven't tried anything else. I will say that it makes a nice growl at WOT as do most/all intakes. I fell a little difference since installing it, but not a whole lot. I'd definately recommend this product!

 

[patrick4588]

what exactly is a velocity stack, where can i get one and will it fit my aem sri?

bpi and blox make them. its like a half mushroom that makes the air coming into the intake funnel in more. you are looking at 3-5hp gain if you make 150hp. there are a bunch of dyno's of them. they come in 3", so if you have a 3" intake you can get one, just need a coupler for it. if you have a different size intake, you will need a transition coupler. and to fit a filter on one, you need a 6" inlet. i currently have an aem dryflow on my blox velocity stack and aem short ram.

 

[ropeadope14]

the password jdm intake is best in looks and power gain i think.

 

[patrick4588]

:whiner:

 

[TeggyBear_Ls]

Password JDM = best

/thread

:lol:

Also, they can be called velocity funnels.
http://cgi.ebay.com/ebaymotors/3-COLD-AIR-INTAKE-SYSTEM-VELOCITY-FUNNEL-FIT-MOST-QTY-2_W0QQitemZ370005858429QQcmdZViewItem
There, Ebay one. Those go after the filter, like on an extension tube. The blox would do the same, but then if you had the blox filter, it would work there too. @ Pepboys they have filters with 3" openings in the front of the filter, and you can get a ram-air tube and run the velocity funnel off of that.