plummo_vtec
New Member
Is no body on here any more?
s2000 cluster project
- Thread starter konerri
- Start date
phatintegra
Banned
seen 2 teg with S2k cluster. I belive another one did a wrte up on Team-Integra while back.
plummo_vtec
New Member
I was getting rather excited by this and now nothing I've even pm'd some of you in this thread and nothing is it dead in the water
quick_spider
New Member
There's been nothing new for a while, but 95% of the info is here. I started off as a complete newbie to PIC's and now my S2000 clocks are almost there.
Orthello's ECT code was missing config (as stated), and I couldn't get his VSS code I just couldn't get to work at all - ended up adapting Kschwiggy's code (counting pulses every 1/8 second and adjusting the PWM output accordingly) and it worked for me.
I've bricked my 93C56 Odometer chip on my JDM clocks trying to enable the km/mph switch - think my EEPROM programmer doesn't work with it, so waiting on a new one which does support it to try and bring it back to life.
Just that and the fuel gauge left for me to sort then I'll install them in my car.
I'm planning on putting ICSP headers in the circuit to allow easy reprogramming of the PIC's (for calibration)
For what it's worth, I'm using a PICKIT 2 for programming the PIC's and Proton IDE to program in PICBasic.
Jon
Last edited:
jason.az1
I'm lost!
ehh, S2k cluster isn't all that great I had a fully functional one in my 96 coupe using the conversion boxes.
and it was cool but it got boring fast I personally would rather have a normal cluster or something
plus doing a burn out and watching the needle bouncing is great but boring with the s2k cluster lol
But I give you 2 thumbs ups for not buying the conversion boxes and making your own cluster work!
and it was cool but it got boring fast I personally would rather have a normal cluster or something
plus doing a burn out and watching the needle bouncing is great but boring with the s2k cluster lol
But I give you 2 thumbs ups for not buying the conversion boxes and making your own cluster work!
quick_spider
New Member
There is no diagram. The code for the chip (which isn't complete) tells you which are the input/output pins and the datasheet shows which pins are 5v and 0v.
quick_spider
New Member
There's a hex dump of one earlier in the thread.
Let me know if you have any luck with it - I bricked by Odometer trying to change the km/mph toggle. I've tried uploading the hex dump from earlier but it doesn't make any difference. I'm not sure if my chip programmer works correctly...
Jon
WorkInProgress
New Member
Think its possible to do this conversion to a 1993 teg ls or would I need to find a differnt cluster to fit right?
WorkInProgress
New Member
Is it possible for someone to send me a list of everything they think I need to do this conversion to my 1993 teg ls?? And do you think its possible to get these items from a honda dealership. Happen to work at one.
koj
New Member
I did try, but with no luck either. I lost odometer on my display so I'm trying to fix it. I thought that chip died but have nothing to put on the new one. Anyone have something that could help us?