HooliganSKATE
New Member
Ok whew.... I was worried about that!! Good to know
Sent from a birds insides using a typewriter
Question on my oil pressure
- Thread starter HooliganSKATE
- Start date
Ok whew.... I was worried about that!! Good to know
Sent from a birds insides using a typewriter
Samurai_Blue
Yolo Whippin'
Where is your pressuge gauge located?
dont forget about your dummy light, I forgot about mine when my sending unit died on track. Scary times.
Mine is about 70PSI WOT @ 300F oil temp. and like 15psi at idle. I run 0W40 oil. Pressure sending unit and temp are located at the filter.
I do get some 'fuzz' on my magnetic drain plug but ive been told thats common for a B series.
dont forget about your dummy light, I forgot about mine when my sending unit died on track. Scary times.
Mine is about 70PSI WOT @ 300F oil temp. and like 15psi at idle. I run 0W40 oil. Pressure sending unit and temp are located at the filter.
I do get some 'fuzz' on my magnetic drain plug but ive been told thats common for a B series.
HooliganSKATE
New Member
I got into it today and I've got 70psi at wot
Sent from a birds insides using a typewriter
Sent from a birds insides using a typewriter
HooliganSKATE
New Member
With the oil at about 220 degrees roughly. The sensor is run off the sandwich plate with a line, then is attached sitting kinda sideways under the car on one of the brackets or something. I can't remember off the top of my head exactly, I know it's on a place that it isn't rubbing or being squished
Sent from a birds insides using a typewriter
Sent from a birds insides using a typewriter
HooliganSKATE
New Member
Your pressure sounds fine.
Good to hear! Thanks for verifying everyone
Sent from a birds insides using a typewriter
Samurai_Blue
Yolo Whippin'
A good rule of thumb is to just take a baseline of the pressure or temp and if it changes drastically then it's time to worry if it's always 60psi at 6mph then it suddenly is 20psi then it's time to worry.