Prozon's '93 GS Build

Prozon

Kris
JVest, I could- but it is getting redone in the future. The piping I got was apparently not for an Integra, so I cut and welded the pipes where needed to make it fit. That's why my intercooler is offset.

Jordan-
Somebody wants to check them out tomorrow for $250. If they want them I will sell them.

Also I might pick up a '95 for my next project, it just happens to be red- so the seats will match it. :)
 

Jvest

*GET SHOOK*
im mainly needing to see the cold side piping and how you routed it around abs and down thru the front of the fender to intercooler......
i would GREATLY appreciate it.
im about to lose it trying to figure out how to run mine without cutting a TON of stuff lol.
 

Prozon

Kris
45 degree silicone coupler off the intake manifold, pipe going straight down the route of the stock intake, through the hole and down where the intake resonator thing was. I will take pictures when I get a chance.
 

Jvest

*GET SHOOK*
i would appreciate it.. did you have to cut any of the metal out to get it to the intercooler?
 


Prozon

Kris
Well i'm waiting on some friends, i'll go snap some shots with the phone. And no, nothing cut. My wiring is an utter mess and my pipe looks like crap though. Lol.

I'll edit this in a second, or post a new post following this.
 

Prozon

Kris
Well, it's really hard to take a picture of the crucial section with the bumper on.. I do remember I cut some metal off though, you could probably hole-saw it or trim it off completely like I did. Not sure what year your car is though?




Ugh, wish I could do better, but it was raining really hard.
 

Prozon

Kris

Forgot I took that earlier. I hate my muddy driveway. Next place I get i'm paving the fucking thing. -_-
 


Prozon

Kris
Oh okay, haha. No video's of the tuning shop yet. I'm going back after I get some shit fixed, so i'll do my best to make a video or take some pictures lol.

Uhhmhmhmhmhmhmhhm.

I need a cameraman.
 

Prozon

Kris
I was going to post a video, but I decided it wasn't worth the hassle. I made a video of driving down the road, lol.
 

Jvest

*GET SHOOK*
my car is a 92.
and thats cool man thats all i needed to see anyways :D
when you redo your hot side piping are you going to cut through the body or go up and over and back down where the washer fluid resivoir sits?
 

Prozon

Kris
That really depends if I pick up a bender and do the piping myself. I would like to route the turbo intake further away from the turbo, and then I would just route wherever is best. Going through the body sounds good to me, I want to get my A/C back on the car lol.
 
You must log in or register to reply here.
Top