No such thing as a dumb question but....

[Notorious-916]

Ok I'm fairly new to my integra, I used to rock a v-dub and an ae86 so help me out. The two bolts that hold the starter, are they the same? because for some reason my starter came loose while driving and the top bolt catches thread and holds fine and i had to get a new bolt for the bottom hole cuz it was missing, and its not threading at all i tried a size bigger and nothing. Please help out if you can

 

[rockadilla]

There's no stupid questions, only stupid people lol JK sorry I couldn't help it dude
Anyway I think its:
Top: 75 N•m
Bottom: 45 N•m
so its probably 2-3 sizes bigger, just keep trying till u find one that fits lol

 

[Andrew93]

...no they are not the same the back bolt is alot longer before the threads start

 

[Notorious-916]

shoot haha aight so i got to jus keep guessin or find one at pick n pull thanks guys

 

[mirrorimg]

The one on the bottom is longer, it actually threads into the block. Acuraoemparts.com will give you moredetails on the part number.

 

[Andrew93]

M10x1.25x100

specs for the lower bolt on a da

maybe slightly different between manual and auto trans....but idk go to an ace and get one and try it out.

 

[nsell]

if your mounting the starter to an automatic tranny the bolts are the same length. but if its manual the top bolt is the same regardless of transmission but the bottom bolt is twice as long.

 

[Cheesenip]

Napa

 

[wite2nr]

if your mounting the starter to an automatic tranny the bolts are the same length. but if its manual the top bolt is the same regardless of transmission but the bottom bolt is twice as long.

bingo! nice 1st post. just take the top bolt in to ace and get a bolt that matches the thread pitch but x2 longer for the bottom