Ominous G2
┌∩┐(◣_◢)┌∩┐
Temporary till I get a CF hatch. Looks ok, less noticable so makes me happy.
My teg needs some work yo.
- Thread starter Ominous G2
- Start date
Ominous G2
┌∩┐(◣_◢)┌∩┐
I'm also taking off that ugly factory fender trim, and the mud flaps. Taking out the A/C started all these little projects, including removing the cruise control.
Ominous G2
┌∩┐(◣_◢)┌∩┐
Of course, spoolin will be hearing from me. Was gonna rock there aspec, but think i want a full rad. So goin with the log, jay jays log manifold from spoolin is beautiful. So I'm sold, might take out the PS as well.
XSI_DA_IN_TN
New Member
Took the p/s out of mine last weekend. Much cleaner.
Ominous G2
┌∩┐(◣_◢)┌∩┐
Did you do the hose rerouting or the 88-91 rack?
XSI_DA_IN_TN
New Member
Just took all the shit out. I need to do something about my crusty ass valve cover.
What do you mean by hose rerouting?
Did a little wire tucking too. Clutch cable and everything else I could hide.
What do you mean by hose rerouting?
Did a little wire tucking too. Clutch cable and everything else I could hide.
Ominous G2
┌∩┐(◣_◢)┌∩┐
Kinda like this.
XSI_DA_IN_TN
New Member
Is this something that needs to be done? Consequences if any?
k624ash
New Member
i recently took out my ps too. I used padwans kit from over on honda-tech. you guys should check that out. It makes steering without the ps easier than if you just pull off the belt or loop it. just go to honda-tech and search for power steering kit and you should be able to find your way to one of those kits.
I like the way the steering feels without the ps better. on top of that it cleans up the bay, removes some weight, and takes a parasitic belt of the engine. So for me anyways its a win win win win situation.
I like the way the steering feels without the ps better. on top of that it cleans up the bay, removes some weight, and takes a parasitic belt of the engine. So for me anyways its a win win win win situation.
XSI_DA_IN_TN
New Member
Will I have problems if it's not looped, or that kit isn't installed?
k624ash
New Member
It will probaly be fine if you just loop it.XSI_DA_IN_TN said:
The kit loops it, but it has a T junction which runs a line up to a little resivior. This is so that when you turn the wheel the fluid has somewhere to go, which is why the kit makes it easier to steer.
I would get the kit if i were you. I think padwan sells the kit for a little under 70 shipped.
XSI_DA_IN_TN
New Member
Everything on mine, is gone. Fluid is gone also. Guess if I have problems, I'll deal with it then.