my 90 teg shake problem HELP!

[kfed]

Maybe I missed this information. Do you have a automatic or manual?

 

[92GSRneedswork]

ok man thanx man , thats the only thing i haven't replaced, it has a lil horizontal back and forth movement but not up and down .
is that normal im not sure?????????? about 1/4 inch

im dont believe it should have any movement, although i could b wrong, im not an expert but i could visibly see that mine is damaged when i took the transmission out, it was damaged where it connects to the axle, but there didnt seem to b any play(movement) after connected to the transmission and bolted back in place, you can either find one in a junk yard or do what im doing, which i recommend is to just go ahead and buy a new one, i know that honda dealerships can get there hands on them, they cost around 200-250, and its an easy install

 

[El Mora]

ok so i finally found the problem and it was the center/half shaft. i rebuilt it with al new honda bushing baering and seals and bam!!!!!! no more shake its smooth as it use to be. although all solid mounts did help it was that shaft lol.

thanks !! all u guys for all ur ideas and advice

 

[obrienintegra18]

93ls

i agree with tie rods i had a couple like that at the dealer that i worked at