MTX Full System pics

patrick4588

Integra God
Pioneer Premier 780mp Head unit
MTX Sledgehmammer Enclosure t7512-44 subs
MTX Thunder Elite Amp 801D
MTX Thunder Elite Amp 404
MTX Components
MTX Coaxials
NipponDenso High Output Alternator
StreetWires Zn2 Rca's
Tsunami 2 Farad Capacitor
Tsunami 4 Channel RCA's
Tsunami Battery Terminals

the full system was about 3000 retail. i still need to carpet the board and put the interior back together, but on to the pics!!





 

patrick4588

Integra God
its pretty loud, and i havent really played with tuning it yet. when turned up it feels like you stuck your head directly into the port on the box. lol
 


Ghettokracker71

LS/Vturd
Yowza,..Back in the day, I was working at circuitcity when the sledgehammers came out,...I remeber how nasty them bitches were lol
 

TegSox

Super Duper Moderator
Why not just put the MTX tweeter behind the factory tweeter grille, it would look better. I think I know the answer, hehe. And your subs may play louder facing backwards, the bass can amplify itself by bouncing off the rear wall of the hatch. And from a handling standpoint, the car will handle a bit better with all that weight closer to the middle of the car.
 

patrick4588

Integra God
TegSox said:
Why not just put the MTX tweeter behind the factory tweeter grille, it would look better. I think I know the answer, hehe. And your subs may play louder facing backwards, the bass can amplify itself by bouncing off the rear wall of the hatch. And from a handling standpoint, the car will handle a bit better with all that weight closer to the middle of the car.
Click to expand...
they wouldnt fit with the stock tweeter grille, and the mtx ones fit right into the spots without any modification. i really dont need the subs to play louder, its stupid loud. if i turned it up all the way it would crack the hatch glass without a doubt. and it looks much better facing me, so im gonna leave it like that. im not too worried about the handling part, my car is for straight lines
 

TegSox

Super Duper Moderator
My MB Quart tweets don't fit behind my factory grilles either, but I put them behind them anyway, they sit back behind the grill a little ways, but they still sound fine. I didn't screw the tweets to anything to mount them there, I just took a piece of Dynamat extreme, like a 5 inch by 5 inch piece, plopped the tweet in the middle and just stuck the whole piece to the door panel. Dynamat extreme will stick to ANYTHING, it's super sticky like pine tar. And of course, it makes a nice seal behind the tweet, keeps out noise, kills vibrations.

 

patrick4588

Integra God
yeah my doors and trunk are wrapped in dynamat xtreme. stuff works pretty good. i work at circuit city btw, so i get everything on discount :).

and just to rub it in... mtx vendor accomodation is 75% off. muwahahahaha.
 

TegSox

Super Duper Moderator
I worked at a private stereo joint and got Alpine, Precision Power, MB Quart, Kicker and JL Audio stuff for basic dealer cost. Dang, I wish I couldv'e gotten my stuff for 75% off! Are you an installer there?
 

patrick4588

Integra God
im getting a lot of noise thru the tweeters for some reason. its directly proportional to how much gain i turn the amp up. im thinkin i need to try a new ground for the head unit :(
 
You must log in or register to reply here.
Top