M0dd3r43v3r's 95 GSR *Slowish Build*

thenoxus1

Quick-Spool Racing LLC
All your hoses secure? No loose spark plug wires? Retrace your steps and check the simple things.
 

m0dd3r43v3r

New Member
It's probably just the fact that there
probably is some air in the coolant hose so I'm going to replace that hose and see on from there
Sent from my ADR6400L using Tapatalk
 

m0dd3r43v3r

New Member



Just posted some pictures so you guys can spot anything that might
Be wrong.

Sent from my ADR6400L using Tapatalk
 

m0dd3r43v3r

New Member
so i have no spark in my engine not idea where the problem starts.
 


OlegWasHere

New Member
make sure all your grounds are connected and you didnt bump your distributor cap.

have you driven the car since you washed and waxed it? could have got something wet in the engine bay???
 

m0dd3r43v3r

New Member
ignition coil was bad changed it out with a new one and my baby is running again :)
 


Cripton805

New Member
Change out that ugly oem coolant line that was attached to the valve cover hose.
Use a fuel line 5/16" about 2' and cut to length.

Use new screw on clamp things. They sell them at Autozone. Make sure to take the radiator cap off and top it off once you have everything hooked up. Check for leaks everyday for a couple of days.
 

m0dd3r43v3r

New Member
So now that my car runs I went to work and with my new intake installed my car sounds mean this password jdm intake is very deep/loud and mean sounding lol was suprised how loud it was. i like it :)
 

JGvtec

New Member
What was the problem with the no spark?

Edit: Scratch that missed the comment. :oops:

Car is super clean man, nice intake.
 
Top