leaking vtec solenoid
- Thread starter junior96
- Start date
teggygrl08
BBHG.. one love.
while youre in your bay you might as well. both aren't hard to do at all. if you haven't already changed your cam seal i recommend it, mine started leaking around the same time that my vtec solenoid gasket did.
here's a good write up on the cam seal, i used it.
http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=576
here's a good write up on the cam seal, i used it.
http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=576
junior96
Wammm bammm BOOMMM!
thanks and i be looseing a lot of oil i dont know why does yours do that too?
teggygrl08
BBHG.. one love.
yeah mine was losing a lot... i changed the cam seal and i recommend changing your valve cover gasket while you're in there. that stopped the leak for a little bit but then a ton started leaking again down my block, by the b18c1 stamp. i changed the distributor o-ring and that didn't work so i changed the vtec solenoid gasket and now it's good as new, no more leaks 
junior96
Wammm bammm BOOMMM!
thanks alot!!yeah mine was losing a lot... i changed the cam seal and i recommend changing your valve cover gasket while you're in there. that stopped the leak for a little bit but then a ton started leaking again down my block, by the b18c1 stamp. i changed the distributor o-ring and that didn't work so i changed the vtec solenoid gasket and now it's good as new, no more leaks
how much did you spend on the cam seal,valve cover gasket and the vtec solenoid gasket ?
Samurai_Blue
Yolo Whippin'
i got a cam seal cap skunk2 PM me if interested
teggygrl08
BBHG.. one love.
ummm i bought a skunk 2 cam seal for about 30 bucks.. you can find different brands for cheaper. vtec solenoid gasket i bought at honda for about 8 bucks and the valve cover gasket i bought for about 25 bucks.