itr headlight HID bulb size

mirrorimg

Well-Known Member
Do you not see the metal tab that holds the light in place?


That metal tab un-hooks, you put the bulb in, and you hook it back up to the little latch. This keeps the bulb from falling out.

EDIT:

It is not OUR fault that you bought multiple sets of bulbs. IT STATES ON THE HOUSING WHAT BULBS FIT IN EACH HOLE

Im pretty sure I said that before.
 
Last edited:

Tam4511

CI BOOST FIEND
thats it?....so what size do i need? casue u said HID's arent supposed to be in that one, but only HID's fit in it.....
 


mirrorimg

Well-Known Member
It is not a twist lock like the low beam. That little metal bar puts pressure on the rear to hold the bulb from falling out. Simple as that.

If you have fog light bulbs, unscrew the top cover. They are held in exactly the same way.

Edit: Hold on, There may be some confusion on my part.

I apologize, I did give you incorrect information.
 
Last edited:

mirrorimg

Well-Known Member
You shouldnt. I do not retract that statement. My confusion is on the bulb type I told you fit into the high beams.

You need H1 bulbs for the highbeam. The 9005's should not fit.
These headlights are from the Japanese Integra Type-R. An H.I.D. projector low beam combined with an H1 high beam and H3 auxiliary driving/fog light provides excellent lighting characteristics and nearly endless combinations of bulb wattage's and colors. The black housing gives that aggressive and sporty appearance that is so desired by any enthusiast. Provided with all JDM Honda H.I.D. parts, ensures excellent bulb fit and longevity. (All parts are Honda O.E. for Integra Type R Japan)
Click to expand...
The 9005's are twist lock correct? like the low beam lights you purchased?
I believe if you still want to use HIDs in the highbeam, you will need to return the bulbs and get H1's, but again, if you are going to use the highbeams as your main source of light, do not get HID's for it. Simply return the product. Im sure they have a return policy.
 


Tam4511

CI BOOST FIEND
ok, i have 9005 silver stars i put in MY high beams, (which are the bubble projector lights) and i have 9006 HID's, i can send the hids back and get 9005's i guess, and ill just buy H3 silverstars.(the 1ns i bought were 2$ brand new so im not complaining) now is this correct? casue i am extremely confused now lol
and ill rewire the lights so the projectors are low beam and reflectors are highbeams
 
Last edited:

mirrorimg

Well-Known Member
Im just as confused as you lol.

Lets try to re-hash what you need.

9006 for the projector. (You used a 9005, it is the same twist style plug, but does not have a coating on the tip to prevent light from going straight out. Not a big deal in the projector housing)

H1 for Reflector (This is the typical high beam. Looking at my signature, the one to the right of the round projector is the high beam)

H3 for Fog light (This is the innermost light next to the high beam housing)




And this is what the high beam, H1 HID will look like
 
Last edited:

Tam4511

CI BOOST FIEND
oh ok, so the projector is actually 9006? ok so i can just send back my 1 burnt HID bulb to be replaced, and order h1 silverstars, and ill rewire it tomorow
 
Last edited:

mirrorimg

Well-Known Member
Ok. To confirm what you were doing, did the 9005's actually fit the spot in your pictures? I can imagine it would, but I am curious.\

You dont need to return the 9005's, I dont think it really makes a difference. Its just that little coating on the tip.

Im signing off for the night, Ill check this thread in the morning to see if you added anything.
 
Last edited:

Tam4511

CI BOOST FIEND
the silverstars? no they didnt, the bulb wouldn ot fit through the hole, i put them in the projectors
i want to put some osram silverstars in it, but im not shure if the actual bulb will fit in the hole
the hid's . i have 9006 hid's im gonna keep them, and put them into the projectors
 
Last edited:
You must log in or register to reply here.
Top