Installed some ddmtuning lights

NemesisCBR

Boredest Member
^i think you mean the fluted lens. gen 3 integras only have fluted lens on the high beams. The halo lights are all cleared out on that part so only oem and oe replacements have it.


Jayvee, oh i understand what you are saying now. Yes if you buy a headlight replacement for say a lexus that is supposed to be a hid model then it will have hid quality projectors. The manufacturing of course matters here. They may be up to par or slightly under, hopefully never worse than that. The oe replacement mercedes projectors i used were about up to par with oem. If you can find one for cheap and verify that it is a hid projector then youre good to go.
 

JayVee

2Dr Banger
@emd513 thanks for the tip !

@nemesiscbr thanks man . Exactly what I meant .

As far as the lights , I'll see if I can hopefully buff out the lens cover nicely . I wanted a refund because they were fairly bad but she refunded me and said just keep them because shipping back was half the price . Lol

Sent from my HTC One X using Tapatalk 2
 

JayVee

2Dr Banger
A friends old ebay headlights to use the lens covers and possibly the lens , but if the lens isn't the same as the oem lens I guess it isn't salvageable . Will do tmrw , after ungluing the cover you mean don't touch the insides ?

Sent from my HTC One X using Tapatalk 2
 


NemesisCBR

Boredest Member
Ebay halos for integra or ebay oe replacements? Dont touch the inside of the plastic lens covers. You can try the projector lens if it fits but the shape might be incorrect for output. If i had the 9006 hid bulb i would test it after work. I have both projectors with me. I was gonna do a light test comparison.
 

JayVee

2Dr Banger
Ebay halos not the ebay oe replicas . Inside of the lens cover , can't youjust clean it or polish it out ? &what do you mean incorrect as in the coned/flutted like you guys were speaking earlier ?

Sent from my HTC One X using Tapatalk 2
 

NemesisCBR

Boredest Member
Incorrect meaning the optics for the projectors lens could be wrong for the shape of the bowl but you wont know til you try it out. You'll know when you test it with a bulb. The halo lens covers are already clear and if theyve been untouched the inside lens should be in good condition. If you go in there to polish or clean you will leave it with tiny scratches. Unless you need to, leave them alone and clean the outside.
 


Top