fuse keeps blowing on my 90 acura integra

[LaoBoy56120]

My turn signals, rpm gauge, temp gauge, and fuel gauge wasn't working for awhile. I replaced the fuses and it worked again. All of a sudden when I backed up out of my friends driveway the gauges and turn signals weren't working again. So I'm wondering if anyone could help me figure out what keeps causing my fuses to blow.

 

[hamfacekilla]

You might have a pinched wire some where and its shorting out your fuses

 

[foxrider25]

Check your ground or for any lose wires im not much on wiring but you can go here http://www.spoonertuner.com/manuals download the fsm look under the electrical section page 110 it will help you more then i can if your any good with wiring and such

 

[92gsrboy]

have you ever taken your cluster out???maybe when you put it back in a wire got piched like ham said

 

[LaoBoy56120]

could it still be a pinch wire if the only time my fuse blow is when i put it in reverse? this is the 3rd red-10 fuse i put in. it works and everything but my fuse blows when i put it in reverse.

 

[92gsrboy]

check back by your reverse bulbs to make sure there isnt any exposed wire touching metal...thats the only thing i can think of

 

[rexpepper123]

i had this problem mine ended up being a running light was missing and the wires were touching. check the power wire under your deck. id also check all your lights make sure none of the or the sockets were bad. electrical probs make me so made they are frustrating and always hard to figure out. good luck!