fully built ls vtec not starting

Aussie

Zoom-Zoom
Quick update just checked ecu for codes and got a code 6 and 10

If im correct code 6 is coolant temp and 10 is intake air temp could this be y my car is not starting?
however you might want to check your coolant temp sensors on the passenger side of the block, specifically the one under the vtec solenoid. If they are not wired up correctly or working right your car won't start, especially now that it's colder out.

That sensor controls fueling according to temperature so if it's not working it will read no temperature, and if I remember correctly it will send max fuel to the motor for startup therefore flooding the engine.
Check this sensor, see if it is putting out 5v to the wire. Make sure your vtec wire and this wire are not mixed up as they are similar and can be switched. Your vtec wire should have 12-13v going to it.
 
Top