Things you'll need :
A phillips screw driver and flat head.
A ratchet and a 17mm socket
And sum time:thumbup:
Remove rear headliner trim :
Remove passenger headliner handle
Use a flat head ti pry off the plastic screw cover-
Then remove screw
Remove sun visors-
This will be held on by two clips and three screws
2 on the right and 1 on left
And opposite for driver
Now rear view mirror
Remove plastic piece at top with a flat head; with a flat head then you'll see-
In the three holes with a screw driver remove the 3 screws
Then it'll come right off
Next, remove dome light cover (plastic clear piece)
Mine broke off a while back so mine was already exposed.
There's a screw holding that housing
Next remove seat belts, there ia a casing hiding the 17mm bolt hold the seat belt you'll need these removed to pull rear window pillars from window just to pull off headliner pull plastic off with flat head
Driver side-
Pass side- copy steps for passenger side
Now the headliner will be held up partially by this pin on passenger side behind the seat belt pillar use a flat head too pry it out mine fell out quick
off
Pull down whether strip trim on doors;
Same for driver
Almost done one more clip to pry open
On window pillar-
Opened -
Then have an extra hand to help pull the rear window pillars apart to pull out/off headliner and should look sunthing like this
hope those help
-Alex
1-7-12