Changing license plates

jmez

New Member
Hello all,

Just bought my '91 Integra LS a week ago, and was finally able to get my title and plates this morning. I came home, grabbed a screwdriver and my plates, and went out to change them. To my surprise though, they're not very easily accessible. Anyone mind explaining to me how I get access to the bolts?
 

hgocasca

level 77 troll
guiltyxxspark said:
They should just be "there". There's nothing blocking access unless it's been changed drastically.
Click to expand...
That's what I'm thinking too, I'm physically in front of my car at this very moment staring at my plates, trying to see any confusion there could be from an oem setup. Easier than getting dressed, two 8mm bolts per plate on mine, easy off, easy back on. Just did it myself to see if it gave any trouble. None. Pics would do wonders on this one:nopics:
 


CrashBandit

92 GS
My mounting brackets are completely rusted out, I could bend them and eventually break it off. We had to ziptie the temp. tag and bend the brackets up with a hammer :/ It'll be fun when my tag comes later this month..
 

92gsrboy

New Member
yea my rear ones were so rusted one of the bolts snapped....and like everyone said they should be easy to get to
 

DagoAcura92

New Member
I think you have some type of bolt cover that makes it look like it is just a "button". I say take a flat screwdriver and slip it between where the plate's bolt holes are and the bolt and the cover should come off.
 
You must log in or register to reply here.
Top