Bubbles in brake lines, warped rotors oh my!
- Thread starter maq
- Start date
maq
New Member
I am fairly certain i have gotten all the air out of my system. But my brakes are still spongy. If however, i blip the throttle before i brake my brakes work just fine. If i don't 8 times out of 10 they just fall to the floor and nothing happens.
I did all the tests listed in the honda manual i have and passed all of them.
If i take the vacuum hose off the check valve my engine idles a little high and when i put it back on it bogs down and idles very low, almost to where it would die.
Could i have something blocking the vacuum inside the booster? Or something else?
I did all the tests listed in the honda manual i have and passed all of them.
If i take the vacuum hose off the check valve my engine idles a little high and when i put it back on it bogs down and idles very low, almost to where it would die.
Could i have something blocking the vacuum inside the booster? Or something else?
SpooledupRacing
Banned
either a leak, air in the system or a bad master cylinder
my guess if the lines are rusted and u may have put a small crack in one of the lines.
OR one or both calipers are junk.
my guess if the lines are rusted and u may have put a small crack in one of the lines.
OR one or both calipers are junk.
maq
New Member
If one of my lines were cracked wouldn't i be leaking brake fluid?either a leak, air in the system or a bad master cylinder
my guess if the lines are rusted and u may have put a small crack in one of the lines.
OR one or both calipers are junk.
SleepWalker42o
New Member
LOL!!!Brakes = noun
Breaks = verb